How To Install Your Canopy Housing - Fanimation VICTORIA HARBOR LP8242SBLCH Manual Del Usuario

How to Wire Your Ceiling Fan (continued)
4. Once the connection has been made, slide the
receiver into the hanger bracket, taking care not to
pinch the wires. (Figure 5)
NOTE: This step is applicable after the neccessary wiring is completed.
1. Assemble canopy by rotating key slot in canopy
over shoulder screw in hanger bracket. Tighten
shoulder screw. Fully assemble and tighten second
shoulder screw that was previously removed.
(Figure 1)
To avoid possible fire or shock, make sure that the
electrical wires are completely inside the canopy
housing and not pinched between the housing and the
ceiling.
2. Securely attach and tighten the canopy screw cover
over the shoulder screws in the hanger bracket utilizing
the keyslot twist-lock feature. (Figure 2)

How to Install Your Canopy Housing

WARNING
Hanger Bracket
11
Receiver
Figure 5
Canopy
Figure 1
Canopy Screw
Cover
Figure 2