Using Your Remote; Primary Audio Control - Philips SRP9232D/27 Manual De Instrucciones

Using Your Remote

Primary Audio Control

The Primary Audio Control feature allows
you to select a single device that the volume
buttons always control. For example, the
remote can be in TV mode while the volume
buttons control the volume on your audio
receiver or sound bar instead of your TV.
Enabling the Primary Audio Control
1. Press and hold down the SETUP
2. Press and release the device
3. Press and release the
4. Press and release the VOL
Disabling the
1. Press and hold down the SETUP
2. Press and release the device
3. Press and release the
4. Press and release the VOL
button on the remote until the
red light on the remote control
turns on. Release the SETUP
button. The red light will
remain on.
button (TV, AUD, etc.) on the
remote for the device you wish
to control the volume.
MUTE button.
button. The red light will blink
twice and turn off.
Primary Audio Control
button on the remote until the
red light on the remote control
turns on. Release the SETUP
button. The red light will
remain on.
button (TV, AUD, etc.)
programmed to control the
Master Volume Feature.
MUTE button.
button. The red light will blink
twice and turn off.
10