Start Up - Truper SOMI-130X Instructivo

Connection Configurations
CAUTION
• All the connections in the control panel shall be fully tightened in their respective power outlet. Secure
the connections turning in a clockwise direction.
• The electrode polarity can be modified depending of the soldering job requirements or needs. Remember making tests
in scrap material to define the right configuration before working on the work piece.
Ground clamp connection into the negative
terminal and torch connection into the positive
terminal. The electrode receives the highest
warming. Recommended for gas welding and
Electrode connection into the negative terminal and the
ground clamp connection into the positive terminal.
The work piece receives the highest warming thus
producing less malformation of the piece and narrower
beads. Ideal for welding thin pieces.
12
ENGLISH
GMAW / FCAW Welding
Torch connection into the negative terminal
and ground clamp connection into the positive
terminal. The electrode receives the highest
warming. Recommended for gasless and core
solid micro wire . micro wire.
SMAW Welding
Ground clamp connection into the negative
terminal and electrode into the positive terminal.
The electrode receives the highest warming, thus
producing more penetration with basic electrodes.
Ideal for welding thick pieces.

Start Up