Ribimex Ribiland PRBAT20/TH Manual De Instrucciones página 19

Symbols (Explanation of symbols appearing on the tool, if applicable).
Warning! Read the instruction manual before operating this machine or prior to
carrying any intervention (e.g. cleaning, maintenance, repair ...) on the tool.
Follow all warnings and safety precautions to avoid a danger
Caution! Risk of injury and/or damage and/or deterioration of product in case of
non-compliance to safety requirements.
Do not expose to weather conditions (ex.: rain, snow ...) or to moisture.
Do not use outdoors during weather conditions (e.g. rain, snow...)
Do not leave outdoors while it is raining
Do not expose product to extreme temperatures (too hot or too cold
environment).
Protect from over exposure to direct sunlight.
Wear protective equipment!
Wear eye protection.
Wear ear protection.
The machine may exceed 85 dB(A) at the workplace; in this case, noise protection
measures need to be taken to protect the user.
Wear dust mask.
Wear protective gloves and boots.
Wear appropriate clothing
Keep all body parts (esp hands and feet) away from the cutting device.
Injury hazard: sharp blades. Never touch or grab the blades either when product
is at rest or during operation.
It is recommended to wear protective gloves for intervention on blades.
Do not touch. After intensive use some parts can get hot such as the motor
housing.
Keep persons (esp. children) and animals away from product and working area.
Other persons and animals should remain at a safe distance of 3 meters or more
when the machine is being used. The operator is solely responsible for third
persons in the working area. Stop tool as soon as someone enters the working
area.
Caution! Danger of injury from flying parts!
Keep persons (esp. children) and animals away from product and working area
Noise level. Wear ear protection.
Tool complies with European directives
Warning: Electrical hazard. Presence of electric current.
Unplug charger immediately from its power supply if its power cord or the
extension cord are damaged. Unplug charger by pulling the plug. Do not pull the
cable.
Disconnect charger from its power supply and remove the battery before
proceeding to any maintenance, cleaning or any intervention on product; before
leaving tool unattended or when tool is not used for prolonged periods of time.
Do not dispose of this product with household rubbish.
Dispose of this product in the nearest recycle centre.
Please contact your local authority or local recycle centre for further information
Page 19 / 81