personal injury and damage.
f) Never attempt to recharge non-rechargeable batteries. Batteries may explode
g) Only use the charge at ambient temperatures between +10C and +40C. Store charger in
a dry location protected from cold where temperature would not exceed +40C. To prevent any
damage to the charger.
h) The charger is intended for indoor use only. Place charger on solid, flat non-flammable
surface and away from any flammable materials when re-charging the battery pack.
Do not recharge the battery pack in a wet or humid environment. The charger and battery
pack may heat during charging process.
2) Battery
a) Do not attempt to open the battery. If the battery is damaged in any way, stop using it
and do not attempt to recharge it. Short-circuit or electric shock or explosion hazard. Discard
it according to local laws.
b) Protect the battery pack against any heat source (e.g. direct sunlight exposure, fire,
heater...). To prevent any damage or explosion hazard.
c) Do not expose the battery pack to water, moisture and cold. To prevent any damage.
d) In case of damage and improper use of the battery, vapours may be released. Ensure
proper ventilation and provide for fresh air to the work area. The vapours can irritate the
respiratory system.
e) Only use the battery pack provided with the tool. The use of other types of batteries may
increases the risk of electric shock, personal injury and damage.
f) Use only original batteries or recommended by the manufacturer with the voltage
matching your tool, as listed on the nameplate. When using other batteries (e.g. reconditioned
batteries or other brands), there is risk of explosion causing injury or property damage.
g) Charge battery pack only at ambient temperatures between +10C and +40C. Store the
battery in a dry location protected from cold where temperature would not exceed +40C. To
prevent any damage to the battery.
h) Do not store or carry a battery in a pocket, toolbox or any other place where it may come
into contact with metal objects. The battery pack terminals may be short-circuited causing
damage to the battery or burns or a fire. Make sure that no conductive material touches the
terminals.
3.4- Special warnings when using the product
1. Become familiar with the controls and the proper use of the tool.
Learn how to stop the tool quickly in an emergency.
2. The use of this product is forbidden to children. Individuals below the age of 16 and individuals
who are not perfectly familiar with the instructions, are not allowed to operate the machine
3. Only well-instructed adults should operate the product. This product is not intended for use by
persons (including children) with reduced physical, sensory or mental capabilities, or lack of
experience and knowledge, unless they have been given supervision or instruction concerning use of
the product by a person responsible for their safety.
4. Within the working area, the person using the machine is responsible for any damage or injury
sustained by third parties or their property which has been caused by the machine. Watch your
working area and do not allow third persons or animals to be around.
5. When operating the machine take great care and always hold it firmly with both hands.
Make sure you are in a stable and secure balanced position. The power tool is guided more securely
with both hands. Wait until the machine has come to a standstill before placing it down.
6. Make yourself familiar with your working area and be alert for possible hazards, which you might
not hear due to the motor noise.
7. Remain aware and remain cautious about foreign objects like wire fences, roots, debris... which
Page 23 / 81