Choose Your Sound; Play Audio Through Bluetooth; Night Mode - Sanyo FWSA205E Manual De Propietario

• All indicators on the front panel
blink twice when the volume is set
to either minimum or maximum.
Note
•
The volume might be influenced by MP3 or
Bluethooth player.

5.2 Choose your sound

Select predefined sound modes to suit
your video or music.
Press sound setting buttons on remote
control to select a sound mode.
» When a button is pressed, the
POWER indicator blinks once.
MUSIC: Recreate the original
•
recording environment of you music,
in the studio or at a concert.
MOVIE: Enjoy a cinematic audio
•
experience, specially enhanced for
movies.
• NEWS: Hear every word with
optimized speech and clear vocals.
• CLASSIC: Flat and pure sound
mode. Ideal for listening to classical
music.
5.3 Play audio through
bluetooth
Through Bluetooth, connect the Sound
Base with your Bluetooth device (such
as an iPad, iPhone, iPod touch, Android
phone, or laptop), and then device through
your Sound Base speakers.
What you need
•
A Bluetooth device which supports
version as 4.1 +
10 EN
EDR.
•
The operational range between the
Sound Base and a Bluetooth device is
approximately 10 meters (30 feet).
1
Press on the remote control to
switch the Sound Base to Bluetooth
mode.
» The
PAIR INPUT
the front panel of main unit blinks
slowly.
2
On the Bluetooth device, switch
on Bluetooth, search for and select
SANYO FWSA205E
Manual of the Bluetooth device on
how to enable Bluetooth).
3
When the Bluetooth connection
succeeds, the Bluetooth indicator
lights up.
• If no any bluetooth device is
connected in two minutes, press
on remote control to activate
PAIR
the paring mode again.
4
Select and play audio files or music on
your bluetooth device.
• During play, if a call is coming,
music play is paused. Play
resumes when the call ends.
5
To exit Bluetooth, select other source.
• When your switch back to
Bluetooth mode, Bluetooth
connection remains active.
Note
•
The music streaming may be interrupted by
obstacles between the device and Sound Base,
such as wall, metallic casing that covers the
device, or other devices nearby that operate in
the same frequency.
•
If you want to connect your Sound Base with
another Bluetooth device, press PAIR button to
disconnect the currently connection.
•
If necessary, enter the passcode 0000.

5.4 Night Mode

Night Mode is a digital Audio feature
equipped with Dolby digital decoder.
indicator on
(see the User