Specific Safety Rules; Functional Description - Milwaukee 1854-1 Manual Del Operador

1. Hold tool by insulated gripping surfaces when performing an operation where the cutting tool may contact hidden wiring or its
own cord. Contact with a "live" wire will make exposed metal parts of tool "live" and shock the operator.
2. Maintain labels and nameplates. These carry important information. If unreadable or missing, contact a MILWAUKEE service facility for a free
replacement.
3. WARNING! Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to cause
cancer, birth defects or other reproductive harm. Some examples of these chemicals are:
• lead from lead-based paint
• crystalline silica from bricks and cement and other masonry products, and
• arsenic and chromium from chemically-treated lumber.
Your risk from these exposures varies, depending on how often you do this type of work. To reduce your exposure to these chemicals: work in
a well ventilated area, and work with approved safety equipment, such as those dust masks that are specifically designed to filter out
microscopic particles.
Symbology
Underwriters Laboratories Inc.
Canadian Standards Association
Mexican Approvals Marking
Volts Direct Current or
Alternating Current
No Load Revolutions Per Minute
Amperes
10
10
9
8
7
10
6

SPECIFIC SAFETY RULES

FUNCTIONAL DESCRIPTION

10
1
2
10
8
7
5
10
4
6
Tool
No
Volts Load Boring
Cat. No. RPM
AC/DC
1854-1 1-1/2"
120 350
2404-1* 250 1-1/2"
120
* To adapt a 3/4" capacity chuck to Cat. No. 2404-1 drill with No. 3 Internal Morse
Taper Socket specify Chuck Kit No. 49-22-1550. Kit consists of Chuck No.
48-66-2000 and Arbor No. 48-07-0100.
1
9
3
4
5
Specifications
Wood
Flat Ship
Hole Auger
Auger Selfeed
Bits Saws Bits Bits
Bits
6"
1-1/2" 1-1/2" 4-5/8"
6" 1-1/2"
1-1/2" 4-5/8"
1. Pipe handle
2. Chuck
(Cat. No. 1854-1)
3. Morse Taper Socket
(Cat. No. 2404-1)
4. Reversing switch
5. Trigger switch
6. Switch handle
7. Motor housing
8. Nameplate
9. Spade handle
10. Insulated gripping surfaces
Steel Masonry
Steel Carbide
Bit Tip Bit
3/4" 1-1/2"
1-1/4" 1-1/2"
page 3