8. Playback from card reader
The multimedia player SPM250 allows you to play files saved in memory cards. The cards supported are: SD Cards (Se-
cure Digital), Multimedia Cards (MMC) and Memory Stick cards (MS):
1. Insert your memory card inside the slot of the card reader located in a side panel of the unit.
2. Wait during the system loading process.
3. Go to the Main Menu using the remote control and select the type of file you want to play. Select "Memory card" option
and all the content of the memory card will be displayed.
4. If you want to disconnect the memor y card from the card reader make sure the device is not playing any file. Go to the
Main Menu and then remove the memory card.
9. First time usage
Before using SPM250 please follow these steps:
· Install the batteries inside the remote control.
· Connect the device to a TV screen using AV or HDMI video outputs (for further information read the ection 6
of this user guide).
· Connect an external storage device (USB device or memory card).
· Connect the power adaptor to the power outlet.
· Put the power switch located in the rear panel of the unit in "ON" position.
9.1 Starter screen
When you turn the device on, it shows the Main Menu screen:
The Main Menu has the following options:
- Movie: Select to display all the video files saved in the external USB storage devices, in the memory card or
through the network.
- Music: Select to display all the music files saved in the external USB storage devices, in the memory card
or through the network.
- Photo: Select to display all the picture files saved in the external USB storage devices, in the memory card
or through the network.
- File Copy: Select to access to the folder/file copy functions. You can copy files between the different external
devices connected to the device and also through the network.
- Setup: Select to access to setup menu.
Important
1. Do not cover the unit, even when you are not using it.
2. Do not use the device in surfaces like sofas, beds or similars because these surfaces make harder a correct airflow of
the unit.
3. Place the device in a place which allows the airflow of the unit.
4. The power adaptor gets hot during the usage of the unit around 40~50ºC.
SPM250 User guide
Index
1. Welcome
2. Features
3. Content
4. Hardware
5. Remote Control
6. TV Connections
6.1 AV Connection
6.2 HDMI Connection
7. USB device connection
8. Playback from card reader
9. First time usage
9.1 Starter Screen
10. Main Menu
10.1 Movie
10.2 Music
10.3 Photo
10.4 File Copy
10.5 Setup
11. Basic operations
12. Network functions
12.1 Wired LAN connection
12.2.1 IP Setup
12.2.2 IP data on Windows XP
12.2.3 IP data on Windows Vista
12.2 Wireless LAN connection
12.2.1 Infraestructure (AP)
12.2.2 Point to Point (Ad Hoc)
13. Files sharing
13.1 Windows XP
13.2 Windows Vista
13.2.1 Mode 1
13.2.2 Mode 2
14. File access through the network
14.1 My Shortcuts
14.2 My Neighbors
15. Firmware upgrading
16. FAQs
English
24