Instructions For Use - Philips SBC RU 240/00 Instrucciones De Manejo

RU240- page 4
SBC RU 240
INTRODUCTION
Congratulations on your purchase of this Philips SBC RU 240 remote control.
The SBC RU 240 is designed for easy operation of most equipment in the home.
It can replace up to 4 remote controls of almost any brand, for televisions (TV),
video recorders (VCR), satellite receivers (SAT) and decoders, even if the original
remote control is lost or broken.
The SBC RU 240 is ready for use with Philips TV, VCR and SAT equipment. To
operate equipment from other brands, you have to set up the SBC RU 240 by
following 3 easy steps. If the brand of your equipment is known, follow the
procedure described in chapter: SETTING UP BY CODE ENTRY
If the brand of your equipment is unknown or not in the code list, you can have
the SBC RU 240 do an automatic code search for your equipment. See chapter
SETTING UP BY AUTOSEARCH.
FUNCTIONS OVERVIEW (see diagram on page 3)
A Indicator LED
B
TV VCR SAT
C y
Power
D a External / source select
E P+, P- Next / previous programme
TV volume Controls
F a
TV Volume louder / softer
G c
Mute
Even if you're operating the VCR or SAT, you can directly access the volume of
the TV with these buttons
H Digits 0..9
I -1/2 digits, 10, 1-
J FastText keys / VCR
red
green
yellow
blue
white
K a Teletext on
L I
Teletext off
M S Shift button
Depending on your equipment, some buttons may work differently. Check the
manual of your equipment to know which functions it will operate.
NORMAL OPERATION
1. Press TV, VCR, SAT or AUX to select the device you want to operate
2. Press any of the function buttons to operate that function.
SHIFT KEY FOR EXTRA FUNCTIONS
Some equipment has more functions than are available here. With the SHIFT
button you can operate some extra functions of your equipment.
Hold SHIFT while pressing another button:
SHIFT - a + /a -:
SHIFT - P+ / P- :
Try the other SHIFT keys to discover other functions of your equipment.
4

Instructions for use

Device buttons
AUX
9 Stop
5 rewind
6 wind
2 play
; pause
Change colour,
Change brightness.