Kenmore 790.8033 Manual De Uso Y Cuidado página 6

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

PRECAUTIONS TO AVOID POSSIBLE EXPOSURE
TO EXCESSIVE MICROWAVE
ENERGY
(a) Do not attempt
to operate
this oven with
the door open. Doing so can result in harmful
exposure to microwave
energy. It is important
not to defeat
or tamper
with the safety interlocks.
(b) Do not place any object
between
the oven
front face and the door, or allow
soil or cleaner
residue to accumulate
on sealing surfaces.
(c) Do not operate
the oven if it is damaged.
It is
particularly
important
that the oven door close properly
and that there is no damage
to the:
(1) Door (bent)
(2) Hinges and latches (broken
or loosened)
(3) Door seals and sealing surfaces
(d) The oven should not be adjusted
or repaired
by
anyone except
for a properly
qualified
service
technician.
ELECTRICALREQUIREMENTS
Observe
all governing
codes and ordinances.
A 120-Volt, 60-Hz, AC-only,
15 or 20-amp
fused electrical
supply is required.
A time delay fuse is recommended.
It is
recommended
that a separate
circuit, serving
only this appliance,
is provided.
Electrical
Shock Hazard
Plug into a grounded
3 prong
outlet. Do not remove ground
prong. Do not use an adapter.
Do not use an extension
cord.
Failure to follow these instructions
can result in death, fire or
electrical
shock.
GROUNDING iNSTRUCTiONS
• For all cord connected
appliances:
The microwave
oven must be grounded.
In the event of an electrical
short circuit,
grounding
reduces the risk of electric
shock by providing
an escape wire for
the electric
current. The microwave
oven is equipped
with a cord having
a grounding
wire with a grounding
plug.
The plug must be plugged
into
an outlet
that is properly
installed
and grounded.
before use
SAVE
A WARNING:
Improper
grounding
can
result in a risk of electric
shock. Consult a qualified
electrician
or service technician
if you do not understand
the grounding
instructions,
or if you wonder
whether
the appliance
is properly
grounded.
Do not use an extension
cord. If the power supply
cord is too short, have a qualified
electrician
or service
technician
install an outlet near the microwave
oven.
• For a permanently
connected
appliance:
This appliance
has a short power supply cord to reduce
the risk of anyone tripping
over or becoming
entangled
in the cord. The microwave
oven must be connected
to
a grounded,
metallic,
permanent
wiring
system, or an
equipment
grounding
conductor
should be run with the
circuit conductors
and connected
to the equipment
grounding
terminal
or lead on the microwave
oven.
THESE iNSTRUCTiONS
EN-6

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido