Safety Notes
Gloves should be worn during installation to prevent
crushing and cutting injuries.
The product may only be used for bathing, hygienic
and body cleaning purposes.
Installation Instructions
• Prior to installation, inspect the product for transport
damages. After it has been installed, no transport or
surface damage will be honoured.
• The pipes and the fixture must be installed, flushed
and tested as per the applicable standards.
• The plumbing codes applicable in the respective
countries must be observed.
• During installation of the product by qualified trained
personnel, make sure that the entire fastening surface
is even and smooth (no protruding seams or tile
offset), that the finish of the wall is suitable to apply
the product and has no weak points.
• The gasket is not suitable for hot glue.
Symbol description
Do not use silicone containing acetic acid!
Dimensions (see page 44)
i
Installation example (see page 32)
Spare parts (see page 45)
4
English
Assembly (see page 40)
Disposal of waste batteries
and old Electrical & Electron-
ic Equipment (applicable in the
European Union and other European
countries with separate collection
systems).
This symbol on the battery, the product or the packag-
ing indicates that the battery or the product shall not be
treated as household waste. By ensuring the battery or
product are disposed of correctly, you will help prevent
potentially negative consequences for the environment
and human health. The recycling of the materials will
help to conserve natural resources. To ensure that the
battery or product will be treated properly, hand over
the product at end-of-life to the applicable collection
point for the recycling of batteries, electrical and
electronic equipment. For more detailed information
about recycling of this product or battery, please
contact your local Civic Office, your household waste
disposal service or the shop where you purchased the
product.