Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

FM/AM
Compact Disc Player
Operating Instructions
Manual de instrucciones
To cancel the demonstration (DEMO) display, see page 12.
Para cancelar la pantalla de demostración (DEMO), consulte la página 13.
CDX-GT50UI
© 2007 Sony Corporation
3-096-839-42 (1)
GB
ES
CS

Publicidad

Tabla de contenido

Solución de problemas

loading

Resumen de contenidos para Sony CDX-GT50UI

  • Página 1 3-096-839-42 (1) FM/AM Compact Disc Player Operating Instructions Manual de instrucciones To cancel the demonstration (DEMO) display, see page 12. Para cancelar la pantalla de demostración (DEMO), consulte la página 13. CDX-GT50UI © 2007 Sony Corporation...
  • Página 2 This label is located on the bottom of the chassis. “ATRAC”, “ATRAC AD”, SonicStage and their logos are trademarks of Sony Corporation. “WALKMAN” and “WALKMAN” logo are registered trademarks of Sony Corporation. Microsoft, Windows Media,...
  • Página 3: Tabla De Contenido

    Table of Contents Other functions Welcome ! ......4 Changing the sound settings ....12 Getting Started Adjusting the sound characteristics —...
  • Página 4: Welcome

    (analog connection). – CD/MD changers: CD/MD changers can be connected to the SONY BUS at the rear of the unit. *1 A CD TEXT disc is a CD-DA that includes information such as disc, artist and track name.
  • Página 5: Setting The Clock

    Setting the clock Attaching the front panel Engage part A of the front panel with part B of The clock uses a 12-hour digital indication. the unit, as illustrated, and push the left side into position until it clicks. Press and hold the select button. The setup display appears.
  • Página 6: Location Of Controls And Basic Operations

    SEEK SEEK MODE GP/ALBM SHUF PAUSE DSPL SCRL CDX-GT50UI qfqg Card remote commander Refer to the pages listed for details. The corresponding buttons on the card remote RM-X151 commander control the same functions as those on the unit. A OFF button To power off;...
  • Página 7 K SEEK –/+ buttons The following buttons on the card remote commander have also different buttons/functions CD/MD* /USB* /PD* from the unit. Remove the insulation film before To skip tracks (press); skip tracks use (page 4). continuously (press, then press again within about 1 second and hold);...
  • Página 8: Display Items

    Radio For details on selecting a CD/MD changer, see Storing and receiving stations page 14. Caution Display items When tuning in stations while driving, use Best Tuning Memory (BTM) to prevent an accident. Storing automatically — BTM Press (SOURCE) repeatedly until “TUNER”...
  • Página 9: Tuning Automatically

    USB devices Tuning automatically Select the band, then press (SEEK) –/+ to search for the station. Playing back USB devices Scanning stops when the unit receives a station. Repeat this procedure until the desired station is received. If you know the frequency of the station you want to listen to, press and hold (SEEK) –/+ to locate the approximate frequency, then press (SEEK) –/+ repeatedly to fine adjust to the desired frequency...
  • Página 10: Listening To Music On A Mass Storage Class Type Audio Device

    iPod Listening to music on a Mass Storage Class type audio device Playing back iPod Repeat and shuffle play By connecting an iPod to the dock connector at 1 During playback, press (3) (REP) or (4) the rear of the unit, you can listen on your car (SHUF) repeatedly until the desired setting speakers, while controlling the iPod from the appears.
  • Página 11: Display Items

    Tips Repeat and shuffle Play • When the iPod is connected to the dock connector, the mode changes to the Resuming mode. In During playback, press (3) (REP) or Resuming mode, pressing the Repeat, Shuffle or (4) (SHUF) until the desired setting Scan button does not function.
  • Página 12: Other Functions

    With the card remote commander Other functions In step 3, to adjust the selected item, press <, M, , or m. Changing the sound settings Adjusting setup items — SET Adjusting the sound Press and hold the select button. characteristics — BAL/FAD/SUB The setup display appears.
  • Página 13: Using Optional Equipment

    DIM (Dimmer) Using optional equipment To change the brightness of the display. – “DIM-ON”: to dim the display. – “DIM-OFF” ( ): to deactivate the dimmer. Auxiliary audio equipment A.SCRL (Auto Scroll) By connecting an optional portable audio device To scroll long displayed item automatically to the AUX input jack (stereo mini jack) on the when the disc/album/track is changed.
  • Página 14: Cd/Md Changer

    Additional Information CD/MD changer Precautions Selecting the changer 1 Press (SOURCE) repeatedly until “CD” or • If your car has been parked in direct sunlight, “MD” appears. allow the unit to cool off before operating it. 2 Press (MODE) repeatedly until the desired •...
  • Página 15: About Usb Devices

    For details on the compatibility of your USB device, visit the Sony support website (page 21). • Corresponding codecs differ depending on device Notes on CD-R/CD-RW discs type.
  • Página 16: About Mp3 Files

    If you have any questions or problems concerning (variable bit rate) AAC file, elapsed playing time your unit that are not covered in this manual, consult may not display accurately. your nearest Sony dealer. * only for 128 kbps Maintenance Note on AAC Playback of a copyright-protected file is not supported.
  • Página 17: Removing The Unit

    In such a case, Fuse (10A) consult your nearest Sony dealer. Cleaning the connectors The unit may not function properly if the connectors 2 Pull the release keys to unseat the unit.
  • Página 18: Specifications

    0.3 % (mono) This unit cannot be connected to a digital preamplifier Separation: 35 dB at 1 kHz or an equalizer which is Sony BUS system compatible. Frequency response: 30 – 15,000 Hz Design and specifications are subject to change without notice.
  • Página 19 No sound. MP3/WMA/AAC files take longer to play back • The volume is too low. than others. • The ATT function is activated. The following discs/devices take a longer time to start • The position of the fader control “FAD” is not set for playback.
  • Página 20: Error Displays/Messages

    Check the connection. If the error indication The unit is confirming the connection of a USB device. remains on in the display, consult your nearest t Wait until confirming the connection is finished. Sony dealer. ERROR* OVERLOAD • The disc is dirty or inserted upside down.
  • Página 21 *2 The disc number of the disc causing the error appears in the display. If these solutions do not help improve the situation, consult your nearest Sony dealer. If you take the unit to be repaired because of CD playback trouble, bring the disc that was used at the time the problem began.
  • Página 22 “ATRAC”, “ATRAC AD”, SonicStage y sus respectivos logotipos son marcas comerciales de Sony Corporation. “WALKMAN” y el logotipo de “WALKMAN” son marcas comerciales registradas de Sony Corporation. Microsoft, Windows Media y el logotipo de Windows son marcas comerciales o...
  • Página 23 Tabla de contenido Otras funciones Bienvenido......4 Cambio de los ajustes de sonido ... 12 Procedimientos iniciales Ajuste de las características del sonido —...
  • Página 24: Bienvenido

    – Cambiadores de CD/MD: es posible conectar cambiadores de CD/MD al BUS de SONY en la parte posterior de la unidad. *1 Un disco CD TEXT es un CD-DA que incluye información como el nombre del disco, del artista y de la pista.
  • Página 25: Ajuste Del Reloj

    Notas Ajuste del reloj • No deje caer ni ejerza excesiva presión sobre el panel frontal y el visualizador. • No someta el panel frontal al calor ni a temperaturas El reloj emplea una indicación digital de altas o excesiva humedad. Evite dejarlo en un 12 horas.
  • Página 26: Ubicación De Los Controles Y Operaciones Básicas

    SEEK SEEK MODE GP/ALBM SHUF PAUSE DSPL SCRL CDX-GT50UI qfqg Control remoto de tarjeta Consulte las páginas indicadas para obtener información detallada. Los botones RM-X151 correspondientes en el control remoto de tarjeta controlan las mismas funciones que los de la unidad.
  • Página 27 K Botones SEEK –/+ Los botones siguientes del control remoto de tarjeta también presentan botones y funciones CD/MD* /USB* /PD* distintos de los de la unidad. Retire la película de Para saltar pistas (presionar); para saltar pistas aislamiento antes de usar la unidad (página 4). en forma continua (presionar y volver a presionar antes de que transcurra 1 segundo y w;...
  • Página 28: Elementos De La Pantalla

    Radio Para obtener más detalles sobre cómo seleccionar Almacenamiento y recepción un cambiador de CD/MD, consulte la página 14. de emisoras Elementos de la pantalla Precaución Para sintonizar emisoras mientras maneja, utilice la función memoria de la mejor sintonía (BTM) para evitar accidentes.
  • Página 29: Sintonización Automática

    Dispositivos USB Sintonización automática Seleccione la banda y, a continuación, presione (SEEK) –/+ para buscar la Reproducción en dispositivos USB emisora. La búsqueda se detiene cuando la unidad recibe una emisora. Repita este procedimiento hasta recibir la emisora deseada. Sugerencia Si conoce la frecuencia de la emisora que desea escuchar, mantenga presionado (SEEK) –/+ para localizar la frecuencia aproximada y, a continuación,...
  • Página 30: Audición En Un Dispositivo De Audio De Almacenamiento Masivo

    Sugerencia Audición de música en un Los elementos que se muestran variarán en función del formato de grabación y los ajustes. Si desea “Walkman” (dispositivo de audio obtener más información acerca de los archivos ATRAC) MP3/WMA/AAC, consulte la página 17; para CD de ATRAC, consulte la página 17.
  • Página 31: Reproducción En Un Ipod

    Sugerencias iPod • Cuando el iPod se conecta al conector de base, el modo cambia al modo de reanudación. En dicho modo, los botones de Repeat, Shuffle y Scan no Reproducción en un iPod funcionan al presionarlos. Si cancela el modo de reanudación presionando (MODE) o (1)/ (2) (GP/ Si se conecta un iPod al conector de base situado ALBM –/+), podrá...
  • Página 32: Reproducción Repetida Y Aleatoria

    Otras funciones Reproducción repetida y aleatoria Durante la reproducción, presione Cambio de los ajustes de (3) (REP) o (4) (SHUF) hasta que sonido aparezca el ajuste deseado. Seleccione Para reproducir Ajuste de las características del REP TRK pistas en forma repetida. sonido —...
  • Página 33: Personalización De La Curva De Ecualizador - Eq3

    Se pueden ajustar los elementos siguientes Personalización de la curva de (consulte la referencia de página para obtener ecualizador — EQ3 más información): “ ” indica el ajuste predeterminado. “CUSTOM” de EQ3 le permite realizar sus propios ajustes en el ecualizador. CLOCK-ADJ (Ajuste del reloj) (página 5) Seleccione una fuente y presione BEEP...
  • Página 34: Uso De Un Equipo Opcional

    Ajuste del nivel de volumen MONO* (Modo monoaural) Para mejorar una recepción de FM defectuosa, Asegúrese de ajustar el volumen de cada equipo seleccione el modo de recepción monoaural. de audio conectado antes de la reproducción. – “MONO-ON”: para escuchar las emisiones 1 Baje el volumen de la unidad.
  • Página 35: Información Complementaria

    Reproducción repetida y aleatoria Información complementaria 1 Durante la reproducción, presione (3) (REP) o (4) (SHUF) varias veces hasta que aparezca Precauciones el ajuste deseado. • Si estaciona el automóvil bajo la luz directa del Seleccione Para reproducir sol, deje que la unidad se enfríe antes de usarla. DISC* un disco varias veces.
  • Página 36: Acerca De Los Dispositivos Usb

    USB, visite el sitio Web de soporte • La unidad es compatible con la norma ISO 9660 técnico de Sony (página 23). de formato de nivel 1 o nivel 2, con la norma • El códec correspondiente difiere en función del Joliet/Romeo en cuanto al formato de expansión y...
  • Página 37: Orden De Reproducción De Los Archivos Mp3/Wma/Aac

    Orden de reproducción de los Acerca de los archivos AAC archivos MP3/WMA/AAC • AAC, que significa Advanced Audio Coding, es un formato estándar de compresión de archivos de Carpeta MP3/WMA/AAC música. Comprime los datos de CD de audio a (álbum) aproximadamente 1/11* de su tamaño original.
  • Página 38: Acerca De Ipod

    Sony más cercano. Sony más cercano. Limpieza de los conectores Es posible que la unidad no funcione correctamente Mantenimiento si los conectores entre ésta y el panel frontal están...
  • Página 39: Extracción De La Unidad

    Extracción de la unidad Especificaciones Extraiga el marco de protección. Sección del reproductor de CD Relación señal-ruido: 120 dB 1 Extraiga el panel frontal (página 5). Respuesta de frecuencia: de 10 a 20 000 Hz 2 Fije las llaves de liberación al marco de Fluctuación y trémolo: inferior al límite medible protección.
  • Página 40: Solución De Problemas

    Esta unidad no puede conectarse a un preamplificador digital ni a un ecualizador que sea Las indicaciones desaparecen del visualizador compatible con el sistema BUS de Sony. o no aparecen en él. • El atenuador está ajustado en “DIM-ON” El diseño y las especificaciones están sujetos a (página 13).
  • Página 41: Mensajes/Indicaciones De Error

    No se inicia la reproducción. No es posible utilizar la sintonización • El disco es defectuoso o está sucio. automática. • Los discos CD-R/CD-RW no son para audio • El ajuste del modo de búsqueda local no es correcto. (página 16). t La sintonización se detiene con demasiada •...
  • Página 42 NO MUSIC Si estas soluciones no ayudan a mejorar la situación, El disco o dispositivo USB no contiene ningún archivo póngase en contacto con el distribuidor Sony más de música. cercano. t Inserte un CD de música en esta unidad o en un Si entrega la unidad para su reparación a causa de...
  • Página 43 Sitio Web de soporte técnico en línea Para obtener información más reciente sobre el soporte técnico de este producto, visite el siguiente sitio Web: Clientes de Latinoamérica: http://esupport.sony.com/ES/LA/ Clientes de Asia y Oceanía: http://www.css.ap.sony.com/ http://www.sony-asia.com/caraudio/...
  • Página 44 您的汽车引擎没有 ACC 位置时的警告 必须设定自动断电功能 (第 12 页) 。 本机在关机后会在设定的时间内完全并自 动切断电源,以防止电池消耗。 如果您未设定自动断电功能,则在每次关 闭引擎时按住 (OFF),直至显示画面消 失。 “ATRAC” 、 “ATRAC AD” 、SonicStage 及其 标志是 Sony Corporation 的商标。 “WALKMAN”和 “WALKMAN”标志是 Sony Corporation 的注册商标。 iPod 是 Apple Computer, Inc. 在美国和其他 国家的注册商标。...
  • Página 45 目录 鸣谢惠顾! ......4 其他功能 更改声音设定 ......11 入门指南 调整声音特性 — BAL/FAD/SUB ..11 自定义均衡曲线 — EQ3 ....11 重设本机 ......4 调整设定项目 — SET ....12 准备卡片式遥控器 ......4 使用选购设备 ......13 设定时钟 ......5 辅助音频设备 ...... 13 拆卸前面板 ......5 CD/MD 换碟机....... 13 安装前面板...
  • Página 46: 鸣谢惠顾

    连接。 – USB 设备:正面的 USB 端子可以连接 Mass Storage Class USB 设备或 “Walkman” (AAD* ) 。关于可以使用设备的详细信息, 请参阅关于 USB 设备 (第 14 页)或 Sony 支持网站 (第 19 页) 。 – 便携式音频设备:本机前面的 AUX 输入插 孔可连接便携式音频设备 (模拟连接) 。 – CD/MD 换碟机:本机背面的 SONY BUS 可以...
  • Página 47: 设定时钟

    设定时钟 安装前面板 如图所示,将前面板的 A 部分与本机的 B 时钟采用 12 小时制数字显示。 部分接合,然后将左侧推入到位直至听到喀 嗒声。 按住选择按钮。 出现设定显示画面。 反复按选择按钮直至出现 “CLOCK-ADJ” 。 按 (SEEK) +。 小时指示闪烁。 转动音量控制拨盘,设定小时和分钟。 若要移动数字指示,按 (SEEK) -/+。 按选择按钮。 设定完成,时钟开始走时。 若要显示时钟,则按 (DSPL)。再按 (DSPL), 返回前一个显示。 用卡片式遥控器操作 要设定小时和分钟,在步骤 4 中按 M 或 m。 注意 切勿在前面板内表面放任何东西。 拆卸前面板 您可以拆卸本机的前面板以防止本机被盗。...
  • Página 48: 控制器位置和基本操作 主机

    控制器位置和基本操作 主机 PUSH SELECT SOURCE SEEK SEEK MODE GP/ALBM SHUF PAUSE DSPL SCRL CDX-GT50UI qfqg 卡片式遥控器 RM- X151 详细说明,请参阅列出页。卡片式遥控器上 与本机上对应的按钮控制相同的功能。 A OFF 按钮 关闭电源;停止音源。 B EQ3 (均衡器)按钮 11 SOURCE MODE 选择均衡器类型 (XPLOD、VOCAL、EDGE、 CRUISE、SPACE、GRAVITY、CUSTOM 或 OFF) 。 C 音量控制拨盘 / 选择按钮 11 –...
  • Página 49 K SEEK -/+ 按钮 卡片式遥控器上的以下按钮与本机上的按钮 / 功能不同。使用前抽出绝缘薄膜 (第 4 页) 。 CD/MD* /USB* /PD* : 跳过曲目 (按);连续跳过曲目(按,然 w; < (.)/, (>) 按钮 后在约 1 秒钟内再按并保持不放);后 控制 CD/ 无线电 /MD/USB/PD,与本机上 退 / 快进一个曲目 (按住) 。 的 (SEEK) -/+ 相同。 无线电: 自动调入电台(按);手动搜台(按住) 。 wa VOL (音量)+/- 按钮...
  • Página 50: 显示项目

    无线电 关于选择 CD/MD 换碟机的详细信息,请参阅 储存并接收电台 第 13 页。 注意 显示项目 当在驾车过程中要调谐电台时,须使用最佳 调谐记忆 (BTM) ,以免发生事故。 自动储存 — BTM 反复按 (SOURCE),直至出现 “TUNER” 。 若要改变波段,则反复按 (MODE)。您可 A AAC/WMA/ATRAC/MP3 指示 以从 FM1、FM2、FM3、AM1 或 AM2 中选择。 B 音源 按住 (BTM),直至 “BTM”闪烁。 C 曲目 / 专辑 / 群组编号 *, 光盘 / 艺术家 / 专 本机将各电台按其频率顺序储存在数字按...
  • Página 51: Usb 设备 播放 Usb 设备

    USB 设备 听 Mass Storage Class 型音频设备中 的音乐 播放 USB 设备 重复和随机播放 1 播放过程中,反复按 (3) (REP) 或 (4) (SHUF),直至出现所需设定。 选择 播放 TRACK 重复播放曲目。 ALBUM 重复播放专辑。 SHUF ALBUM 以随机顺序播放专辑。 将 USB 设备连接至 USB 端子。 SHUF DEVICE 以随机顺序播放设备。 播放开始。 若要返回正常播放模式,则选择 “ OFF” 如果已经连接了...
  • Página 52: Ipod 播放 Ipod

    iPod 显示项目 播放 iPod 在本机背面的对接口连接 iPod 即可通过汽车 曲目 / 专辑 / 艺术家名称,曲目编号,已 扬声器聆听,同时通过本机控制 iPod。 播放时间,时钟 注意 • 在 iPod 连接对接口时,无法在 iPod 上执行操作。 若要更改显示项目,按 (DSPL) ;若要滚动 • 在将 iPod 连接到对接口之前,先调低本机的音量。 显示项目,按 (SCRL) 或设定 “A.SCRL-ON” (第 12 页) 。 播放曲目 注意 某些保存在 iPod 中的字母可能显示不正确。 设定播放模式...
  • Página 53: 其他功能 更改声音设定

    其他功能 扫描 您可以快速找寻 iPod 上的指定点。 更改声音设定 在播放过程中,按 (5) 直至出现 “SCAN ON” 。 将播放每个曲目的前 10 秒。 调整声音特性 — BAL/FAD/SUB 您可以调整平衡、音量衰减和超低音扬声器 若要返回正常播放模式,则选择 “SCAN 音量。 OFF” 。 注意 反复按选择按钮,直至出现 “BAL” 、 在随机播放过程中该功能无效。 “FAD”或 “SUB” 。 项目将如下改变: LOW* t MID* t HI* BAL (左-右) t FAD (前-后) t SUB (超低音扬声器音量)...
  • Página 54: 调整设定项目 - Set

    MONO* (单声道模式) 调整设定项目 — SET 若要改善信号弱的 FM 接收,则选择单声道 接收模式。 按住选择按钮。 –“MONO-ON” :以单声道收听立体声广播。 出现设定显示画面。 –“MONO-OFF” ( ) :以立体声收听立体声 反复按选择按钮,直至出现需要的项目。 广播。 转动音量控制拨盘,选择设定 (例如, LPF* (低通滤波器) “ON”或 “OFF” ) 。 选择超低音扬声器截止频率: “LPF OFF” ( ) 、 “LPF125Hz”或 “LPF 78Hz” 。 按住选择按钮。 BTM (第 8 页) 设定完成,...
  • Página 55: 使用选购设备

    使用选购设备 CD/MD 换碟机 选择换碟机 辅助音频设备 1 反复按 (SOURCE),直至出现 “CD”或 通过将选购的便携式音频设备连接至本机的 “MD” 。 AUX 输入插孔 (立体声迷你插孔) ,然后只 2 反复按 (MODE),直至出现想要的换碟机。 需选择音源,即可通过汽车扬声器聆听。 可以调节本机与便携式音频设备之间的音量 差异。按下列步骤进行: 连接便携式音频设备 装置编号 光盘编号 1 关闭便携式音频设备。 播放开始。 2 调低本机的音量。 跳过专辑和光盘 3 连接到本机。 1 在播放过程中按 (1)/(2) (GP/ALBM -/+)。 跳过 按 (1)/(2) (GP/ALBM -/+) 专辑...
  • Página 56: 附加信息 使用前注意事项

    和 ATRAC 音频设备型 USB 设备。但是,本机无 光盘弯曲。 法通过 USB 集线器识别 USB 设备,并且与具有 • 本机不能播放非标准形状的光盘 (例如,心 集线器功能的设备不兼容。关于您 USB 设备兼 形、正方形、星形) 。若试图播放此类光盘, 容性的详细信息,请访问 Sony 支持网站 (第 则可能会损坏本机。切勿使用此类光盘。 19 页) 。 • 您无法播放 8 cm CD。 • 相应的编解码器根据设备类型而有所不同。 • 在播放之前,请使用市售清 – Mass Storage Class:MP3/WMA/AAC 洁布清洁光盘。从光盘的中...
  • Página 57: Mp3/Wma/Aac 文件的播放顺序

    扩展名 “.wma” 。 – 第二代 iPod nano:1.1 版 • 在 VBR (可变比特率)WMA 文件播放过程中或 (不支持第五代 iPod 的视频功能和 iPod 快进 / 后退过程中,已播放时间可能不会精确 photo 的照片功能) 。 显示。 如果您对本机有疑问或问题,而本说明书中未 * 仅限 64 kbps 提及,请向附近的 Sony 经销商咨询。 关于 WMA 注意事项 不支持播放下列 WMA 文件。 – 无损压缩 – 受版权保护...
  • Página 58: 取出本机

    • 切勿用金属镊子夹电池,否则可能会引起短路。 取出本机。 1 将两把开锁钥匙同时插入,直至听到喀 嗒声。 更换保险丝 挂钩朝里。 更换保险丝时,必须确保所 使用的保险丝与原保险丝的 额定安培数相同。如果保险 丝烧断,请检查电源连接并 更换保险丝。如果保险丝更 换后又被烧断,则可能是内 部故障。此时,请向附近的 2 拉出开锁钥匙,使本机脱离原位。 Sony 经销商咨询。 保险丝 (10A) 清洁连接器 如果本机与前面板之间的连接器不干净,则本机 可能会运作不正常。为防止这种情况发生,请拆 卸前面板 (第 5 页) ,然后用棉签清洁连接器。 切勿施加太大的力量。否则,可能会损坏连接 3 将本机从安装位置滑出。 器。 主机 前面板的背部 注意 • 为了安全起见,在清洁连接器之前,应关闭引擎并从 点火开关上拔下钥匙。 • 千万不要用手指或任何金属工具直接接触连接器。...
  • Página 59: 故障诊断

    87.5 - 107.9 MHz (以 200 kHz 为一级) FM 调谐间隔:50 kHz/200 kHz 可切换 天线端子:外接天线连接器 中频:10.7 MHz/450 kHz 注意 可用灵敏度:9 dBf 本机不能连接至与 Sony BUS 系统兼容的数字前置放大 选择度:400 kHz 时为 75 dB 器或均衡器。 信噪比:67 dB (立体声) ,69 dB (单声道) 1 kHz 时谐波失真:0.5 % (立体声) , 设计和规格若有变更,恕不另行通知。...
  • Página 60: 出错显示 / 信息

    记忆内容已被消除。 无线电接收 • 已按过 RESET 按钮。 无法接收电台。 t 再将设定存入内存中。 有噪音干扰。 • 电源导线或电池已断开连接。 • 请将电动天线控制导线 (蓝色)或附件电源导线 • 电源导线未被正确连接。 (红色)连接至汽车天线升缩器的电源导线 (仅 储存的电台及正确时间被消除。 当您的汽车在后 / 侧玻璃内有内置 FM/AM 天线 保险丝已熔断。 时) 。 切换引擎位置时产生噪音。 • 检查汽车天线的连接。 导线与汽车附件电源连接器未正确匹配。 • 自动天线不能上升。 t 检查电动天线控制导线的连接。 显示从显示窗口消失或不出现在显示窗口中。 • 检查频率。 • 调光器设定为 “DIM-ON” (第 12 页) 。 •...
  • Página 61 CD/MD 换碟机内未插入光盘。 显示在显示屏上。 t 将光盘插入换碟机。 *2 造成错误的光盘号出现在显示屏上。 NO INFO MP3/WMA/AAC 文件或 ATRAC CD 中未写入文本信 如果这些解答仍无法助您改善情况,请向您附 息。 近的 Sony 经销商咨询。 如果因为 CD 播放故障而将本机送修,请带好出 NO IPOD 现问题时所使用的光盘。 未连接 iPod。 t 将 iPod 连接到对接口。 如果在将 iPod 连接到对接口时出现 “NO IPOD” , 请将 iPod 从对接口断开连接,然后重新连接。...
  • Página 64 Support site If you have any questions or for the latest support information on this product, please visit the web site below: Customers in Latin America: http://esupport.sony.com/ES/LA/ Customers in Pan Asia: http://www.css.ap.sony.com/ http://www.sony-asia.com/caraudio/ http://www.sony.net/ Sony Corporation Printed in Thailand...

Tabla de contenido