Important: The device is not designed or intended for use in life-support
systems and/or nuclear facilities. The device can only be used for these
purposes with prior written permission/clarification from the manufacturer in
each individual case.
Improper use may, for example, cause functional restrictions or
malfunctions, the destruction of the device or, in a worst case scenario,
personal injury.
• If you are still uncertain about how to use the product properly after reading
the section below, please contact your specialised dealer.
• Read the manuals for the device and keep them for future reference.
• Some of the functions require an additional software expansion
(activation), activation by the network provider, and/or configuration via the
Configuration Manager.
Proper Use
VoIP telephone for connection to Ethernet network. The telephone is corded,
and is intended for use in closed, dry rooms.
Technical Data
Operating voltage
PoE class
Power
consumption
System connection 10/100Base Tx Ethernet
System function
during operation
on
Memory
Displays
User elements
Receiver
Headset
Supply via the Ethernet port using PoE in compliance
with IEEE 802.3af. (If there is no PoE supply on the
network, use a PoE injector, available as an
accessory.)
2 (identified on the type plate)
Min. 2.4 W, max. 4.1 W
COMmander 6000/R/RX, COMpact 4000,
COMpact 5000/R, COMpact 5200/5200R/5500R
Micro SD/SDHC card, 16 GB (recommended, not in
the scope of delivery)
14 LEDs, 11 are polychromatic. 3.5" TFT colour
display, 320 x 240 pixels, backlight
Keypad, 13 permanently assigned function keys,
colour display with touch operation, directional pad,
10 programmable function keys (on which up to two
functions can be assigned on two levels), additional
touch function keys on the display
Wideband audio, electret microphone, dynamic
receiver loudspeaker, hearing aid compatible
Separate interface for dynamic headsets