Cafe CHS900P Manual De Proprietário página 32

Troubleshooting tips ... Before you schedule service
Problem
"Probe" appears in the
display.
Pan won't pair or activate
when tapping handle.
Experiencing performance
or minor technical issues
including seeing 20F or 100F
as set temperature.
The unit cancelled my
precision cooking mode.
32
Possible Cause
This is reminding you to enter a probe
temperature after plugging in the probe.
This is reminding you to enter a probe
temperature after plugging in the probe.
Using different pan hardware.
Old unit or pan software.
Old unit or pan software.
Your precision cooking device has gone out
of range.
Your precision cooking device had a
computation malfunction.
The unit lost communication with your
precision cooking device.
Some cooking techniques and set
temperatures in combination may trigger a
fault in the temperature sensing algorithm.
What To Do
Enter a probe temperature.
Enter a probe temperature.
Check that your pan has a black endcap that unscrews from
the end of the handle. Pans with an oval module reading
"Hestan Cue" will not work with Café appliances.
Connect your unit to the Café app and update unit software.
Connect your unit and pan to the Hestan Smart Cooking app
and update pan software.
Connect your unit to the Café app and update unit software.
Connect your unit and pan to the Hestan Smart Cooking app
and update pan software.
This could indicate a problem with the device. If the problem
persists, please contact the device manufacturer.
This could indicate a problem with the device or the unit.
If the problem persists, please contact the device or unit
manufacturer.
Re-start the precision cooking mode and if problem persists
under the same conditions but is not consistent in other use
cases, contact the unit manufacturer.
49-2000232 Rev. 1