Wagan Tech Quick Set 7301 Manual De Usuario página 5

6. Rotate Quick Set dial so that white arrow points to the correct air pressure
required by your vehicle's tires. If you are unsure of the correct air pressure,
check the sticker on the driver's-side door jamb or your vehicle's User
Manual.
7. Press On/Off switch to start the air compressor.
NOTE: If your vehicle tire is completely deflated, it is possible that the seal
between the tire and the rim is broken, allowing air to leak out when trying
to inflate. In the event this situation occurs, you will need to jack up your car
prior to inflating the tire.
8. Compressor will turn off automatically when set pressure is reached. To turn
off compressor before set pressure is reached, press the On/Off switch.
9. To reset the air compressor for future use, press the On/Off switch once.
10. Unlock air nozzle and disconnect hose from valve stem.
11. Unplug the power cord from 12V socket and store the hose and cord back
into the unit.
s WARNING: DO NOT OVERINFLATE PRODUCTS BEYOND THE
MANUFACTURER'S RECOMMENDATIONS.
s WARNING: NEVER LEAVE COMPRESSOR UNATTENDED WHILE IN USE.
Wagan Tech and wagan.com are trademarks used by Wagan Corporation.
User's Manual—Read before using this equipment
©2016 Wagan Corporation. All Rights Reserved.
4