Care And Maintenance; Troubleshooting - Wagan Tech Quick Set 7301 Manual De Usuario

Quick Set by Wagan Tech
™
WORK LIGHT
This air compressor comes with a built-in LED worklight that turns on automatically
whenever the DC cord is plugged in.

CARE AND MAINTENANCE

• Use only mild soap and a damp sponge to clean compressor.
• Do not immerse any part in liquid.

TROUBLESHOOTING

Problem
Compressor does not
start/blows fuses.
Compressor runs but does
not inflate.
Compressor runs slowly.
5
®
Solution
• Push the power plug firmly into the DC socket
and twist it back and forth to ensure clean
contact.
• Check DC socket for dirt and particles. Use a
non-conductive probe to clean the DC socket.
Do not use your fingers or metal.
• Check vehicle lighter fuse; should be 15 amps
minimum.
• Be sure the nozzle always touches the core of
the valve stem.
• Check tire or other item being inflated for
leaks.
• Check hose for breaks and leaks at fittings.
• Overheated from excessive use. Shut it off and
let it cool for 30 minutes.
• Voltage too low. Check condition of battery.
www.wagan.com