Parts Description; Preparing For Use - Beper 90.347 Manual De Instrucciones

Swing Mixer with Rotating Bowl Use instructions

PARTS DESCRIPTION

8. mixing bowl
1. mixer head
2. turbo button 9. mixing plate
10. cradle release button
3. speed switch
4. eject button 11. cradle
12. mixer release button
5. dough hooks
13. mixer stand
6. beaters
7. spatula

PREPARING FOR USE

PREPARING YOUR HANDMIXER
1. Insert the dough-hooks/beaters into the mixer head. (Fig.1)
2. Make sure the dough-hooks/beaters are locked at the right place. (Fig.2)
If using the mixer with stand, insert the dough-hook/beater with the plastic gear ensuring it aligns
with the drive gear on the cradle.
The dough-hooks/beaters can only be removed when the speed switch is in the off "0" position.
PREPARING YOUR STANDMIXER
1. Press the cradle release button, raise the cradle. Place the mixing
bowl onto the mixer stand. (Fig.3, Fig.4)
2. Put the mixing plate onto the stand, then press the cradle release button, push down the cradle.
(Fig.5, Fig.6, Fig.7)
3. Hold and press down the mixer head Onto the cradle, lock it properly. (Fig.8, Fig.9)
12