Shutting Down And Storage - Solo 880-12 Manual De Instrucciones

Operating and maintenance notes

8.10 Shutting down and storage

Before shutting down and storage, the power tool must be cleaned thoroughly and checked for damage.
Cleaning and care: Î Chap. 8.1, page 30
Only store the power tool in dry rooms. There must not be any open sources of fire or the like nearby.
Prevent unauthorised use – in particular by children.
Before extended storage (> 4 weeks), additionally empty the tanks for operating materials in a well-
ventilated location and clean them. Start engine with the fuel tank empty and empty the carburettor until
the engine goes out. Oil residue from the fuel lubrication may otherwise close the carburettor nozzles and
make start-up more difficult later.
ENGLISH 39