Switching The Appliance On; Operating Tips; Setting The Language; Setting The Temperature Unit - Bosch B30IR800SP Instrucciones De Uso Y De Montaje

Ocultar thumbs Ver también para B30IR800SP:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Switching the Appliance On

Switch the appliance On with the POWER Button.
The appliance begins to cool. Light turns on when
the door is open.
,
CAUTION:
Keep hands and fingers away from front and rear
openings of the refrigerator door when closing.
Risk of injury to hands or fingers!
Never allow children to climb on or play with
the refrigerator door.

Operating Tips

When the appliance has been switched on, it may
take several hours until the set temperature is
reached.

Setting the Language

The Display Languages can be changed according
to the table in the chapter "Special Functions", section

"Setup Mode".

To change the Display Language:
1. Press the SETUP Button.
2. Press the B or C Selection Button, until the set
language is displayed.
3. Press the @ or A Setting Button, until the desired
language is displayed.
4. Press the SETUP Button, in order to store
the settings.
The set temperature is displayed again on the
Display Panel.

Setting the Temperature Unit

The temperature can be displayed in degrees
Celsius (°C) or degrees Fahrenheit (°F).
1. Press the SETUP Button.
The first menu (Temperature Unit) is displayed.
2. Press the @ or A Setting Button in order to switch
between degrees Fahrenheit (°F) and degrees
Celsius (°C).
3. Press the SETUP Button, in order to store
the settings.
The set temperature is displayed again on the
Display Panel.

Setting the Temperature

Refrigerator Compartment

(can be selected from +35 °F (2 °C) to +46 °F (8 °C))
We recommend a setting of +37 °F (3 °C).
Perishable food should not be stored above +37 °F
(3 °C).
1. Press the B Selection Button.
2. Set the temperature with the @ (warmer)
or A (cooler) Setting Button.

Special Functions

The following Special Functions can be selected
or displayed:
Setup Mode
In Setup Mode you can make your personal settings.
Switching On
Press the SETUP Button.
The first menu (temperature unit) is displayed on the
Display Panel.
Making Settings
1. Switch on Setup Mode.
2. Press the B or C Selection Button.
The next menu is displayed and its current setting
(mostly ON or OFF).
3. Press the @ or A Setting Button.
4. Press the B or C Selection Button to save and move
to the next menu.
en-us
9

Publicidad

Tabla de contenido
loading

Tabla de contenido