Technical Specifications - SPARKY BM 1060E Instrucciones De Uso

Technical specifications

Model
Power input
No load speed
Synchronized two-speed gear
Electronic speed pre-selection
Constant electronics
Current clutch, thermal protection
Spindle thread
Weight (EPTA Procedure 01/2003)
Protection class (EN 60745-1)
NOISE AND VIBRATION INfORMATION
Measured values determined according to EN 60745.
Noise emission
A-weighted sound pressure level L
Uncertainty К
pA
A-weighted sound power level L
Uncertainty К
wA
Wear hearing protection!
Vibration emission *
Total vibration values (vector sum in the three axes) determined according to EN 60745:
Stirring medium density solution
Vibration emission value a
Uncertainty К
* The vibration emission values are determined according to 6.2.7 EN 60745-1.
The vibration emission level given in this information sheet has been measured in accordance with
a standardised test given in EN 60745 and may be used to compare one tool with another. It may be
used for a preliminary assessment of exposure.
The declared vibration emission level represents the main applications of the tool. However if the tool
is used for different applications, with different accessories or poorly maintained, the vibration emis-
sion may differ. This may significantly increase the exposure level over the total working period.
An estimation of the level of exposure to vibration should also take into account the times when the
tool is switched off or when it is running but not actually doing the job. This may significantly reduce
the exposure level over the total working period.
Maintain the power tool and the accessories and keep your hands warm during operation to reduce
the harmful effect of vibrations.
Dust from material such as paint containing lead, some wood species, minerals and metal may be
harmful. Contact with or inhalation of the dust may cause allergic reactions and/or respiratory dis-
eases to the operator or bystanders.
▪ The work place must be well ventilated.
▪ The use of a dust mask of filter class P2 is recommended.
Follow national requirements for the materials you want to work with.
Original instructions
BM 1060E
1050 W
200-750 min
no
yes
no
no
M14
4.8 kg
II
92.0 dB (A)
pA
3.0 dB (A)
103.0 dB (A) 95.0 dB (A)
wA
3.0 dB (A)
4.0 m/s
h
2.0 m/s
BM 1060CEplus BM2 1060CEplus
1050 W
0-530 min
-1 -1
no
yes
yes
yes
M14
4.5 kg
II
84.0 dB (A)
3.0 dB (A)
3.0 dB (A)
3.0 m/s
2 2
2.0 m/s
2 2
1050 W
0-530min /0-740min
-1 -1
yes
yes
yes
yes
M14
4.6 kg
II
84.0 dB (A)
3.0 dB (A)
95.0 dB (A)
3.0 dB (A)
3.0 m/s
2
2.0 m/s
2
3
EN