Style selections 1678VM-49-292 Manual Del Usuario página 7

MIRROR INSTALLATION INSTRUCTIONS
2. Measure and mark location for mounting hardware on
the wall using the measurement from Step 1. Make
sure the marks are level and located at the desired
height.
Note: Make sure to allow height clearance along the
bottom of the mirror for your faucet if necessary.
3. If the wall is drywall, there is no need to drill pilot holes
for wall anchors (BB). Screw anchors (BB) flush into the
wall. Then, insert screws (CC) into anchors (BB), leaving
approximately 1/4 in. protruding out from the wall.
If the wall is not drywall, please choose appropriate
mounting hardware (not included) for your installation site,
and follow the installation instructions to secure the
mounting hardware to the wall.
Hardware Used
Anchor
BB
Screw
CC
4. With the assistance of another adult, lift mirror (E)
to the wall and hang mounting hangers (F) on screws
(CC).
x 2
x 2
7
2
3
BB
BB
CC
CC
BB
4
Vertical Mounting
E
Horizontal Mounting
E
CC
1/4 in.
CC
F