Kompernaß KH 2284 Instrucciones Para El Manejo Y La Seguridad página 13

Connecting
to mains
Radio
reception
Aerials
Setting
the time
Setting the
alarm time
Setting the
alarm mode
13
Gb
socket). Never use cleaning agents as they could damage
the housing.
Insert the plug into a mains socket (make sure the mains voltage
matches that of the device).
Switch on the radio by moving the function switch
position.
Set the band selector switch to the required position (VHF or
MW) . Set the volume using the volume control
Set the radio to the VHF or medium wave frequency of your
choice using the tuner
FM (VHF): Unwind and position the wire aerial for best
reception of VHF.
AM /MW: The radio has a sensitive ferrite aerial.
Press and hold down the TIME button
whilst pressing the HOURS
see the correct time in the display.
Press the ALARM
the required alarm time appears in the display.
1 First set the required alarm time as explained above.
2 If you wish to be woken by the buzzer set the FUNCTION
SWITCH to BUZZ (ALARM). The activated alarm mode is
then shown in the display.
· If you wish to be woken by the radio, set the FUNCTION
.
or MINUTES
and HOURS or MINUTES
into the ON
.
(TIME / TIME-SET)
button until you
button until