REV Ritter 00973 Manual Del Usuario página 4

Halogen floodlight projector with movement detector
Read this manual carefully before using this product and check whether there are any damaged parts.
The product has not to be installed in case of damages. Keep this product out of reach of children or any
unauthorized persons. At the end of its lifetime, please dispose of the product correctly. Electronic
components have to be disposed of as no standard landfill.
This product has been developed according to the latest technology. You are obliged to install it according
to the valid regulations or to have it installed by a qualified expert. The entire manual has to be followed
when installing and using this products. This manual is subject to technical changes.
The packaging includes:
Halogen floodlight projector with movement detector 500W
Suitable bulb
How a movement detector works
Movement detectors are electronic devices turning on and off. They are equipped with a lens recording
thermal radiation. When the origin of this thermal radiation changes its location or starts moving, the
movement detector activates the integrated halogen floodlight projector for an adjustable time. The
starting time begins when the origin to the thermal radiation stops moving.
The movement detector works at daylight as well as at night. By turning a switch, one can adjust directly
the brightness from which the movement detector activates the halogen floodlight projector.
How to adjust your movement detector
The sensitivity of the movement detector can be adjusted with the sensitivity switch (SENS). This means
that turning the switch clockwise the detection range will increase and the movement detector will register
smaller objects. Turning the switch counter-clockwise will result in a smaller detection range and the
movement detector will only register bigger objects.
The switching duration can be adjusted with the timer switch (TIME) directly for a duration between 5
seconds approx. and 8 minutes approx. The brightness (LUX) when the device turns on and off can be
adjusted between 3 lux approx. (dark) and 1000 lux approx. (bright).
The detection range of the halogen floodlight projector can
be changed by 75° horizontally and by 90° vertically.
SENS TIME LUX SENS TIME LUX SENS TIME LUX
GB