Sebson IR WAL B Instrucciones De Manejo página 10

Function test:
Ensure that the motion detector is not obscured. Ensure that the coverage area is not restricted by items such as
through large furniture. To set the detection range and the daylight test, turn the knobs to the positions shown. The
motion detector is activated after a warm-up phase of approx. 30s. If no further movement takes place in the
sensing area of the sensor, the sensor switches off.
Technical Data:
Operating voltage: 220 -240V AC 50/60Hz
Maximum power consumption: Max. 100W
Consumption in standby: < 0,5W
Electrical protection: IP20
Protection class: II
Detection moving speed: 0,6-1,5m/s
Ambient temperature: -20° - +40°C
Humidity: <93%
Possibilities of adjustments:
Detection area: Max.9m (<24°C)/160°
Sensitivity when switching (with regard to
<3-2.000LUX
the ambient brightness):
Time setting (switching off delay): Min. 10s +/- 3s - Max. 7min +/-2min
Disposal note:
This product may not be disposed of with household waste. At the end of its useful life, the product must be
returned to a point of acceptance for the recycling of electric and electronic device. Please ask your local
municipality for the point of acceptance! As the devices contain valuable recyclable materials, they should be sent
for recycling, in order not to harm the environment or human health from uncontrolled waste disposal.
10