Beurer FM 90 Instrucciones De Uso página 19

Step 4: Set the mode
The foot massager has three different massage modes. Se-
lect your desired mode using the mode button
Mode 1: LED green = Only air pressure
Mode 2: LED blue = Massage without air pressure
Mode 3: LED red = Massage with air pressure
Step 5: Set the intensity
For the air pressure massage, the foot massager has three
intensity levels (low, medium, high). Select your desired in-
tensity level using the intensity button
LED green = low intensity
LED blue = medium intensity
LED red = high intensity
Step 6: Switch the heat on/off
The foot massager has an optional heat function. You can
warm your feet during the massage by using the heat func-
tion.
• To switch on the heat function, press the heat button
during the massage. The LED on the heat button begins
to light up red. Press the heat button again to switch off
the heat function. The LED on the heat button goes out.
Step 7: Stop the foot massage
• If, during use, you experience an excessive or unpleas-
ant feeling of pressure, press the start/stop button to
stop the treatment. To start the foot massager again,
press the ON/OFF button
Step 8: Switch off the foot massager
• To switch off the foot massager, press the ON/OFF
button when the device is switched on. The LED on
the ON/OFF button
.
.
goes out.
19
.