ASROCK Z690 Phantom Gaming 4/D5 Manual Del Usuario página 23

Serial ATA3 Connectors
Right Angle:
(SATA3_0:
see p.1, No. 16) (Upper)
(SATA3_1:
see p.1, No. 16) (Lower)
(SATA3_2:
see p.1, No. 15) (Upper)
(SATA3_3:
see p.1, No. 15) (Lower)
USB 2.0 Header
(9-pin USB_2_3)
(see p.1, No. 22)
USB 3.2 Gen1 Headers
Right Angle:
(19-pin USB3_4_5)
(see p.1, No. 14)
Vertical:
(19-pin USB3_6_7)
(see p.1, No. 11)
Front Panel Type C USB
3.2 Gen2x2 Header
(20-pin F_USB32_TC_1)
(see p.1, No. 13)
USB_PWR
P-
P+
GND
DUMMY
1
GND
P+
P-
USB_PWR
1
Vbus Vbus
Vbus IntA_PB_SSRX-
IntA_PA_SSRX- IntA_PB_SSRX+
IntA_PA_SSRX+ GND
GND IntA_PB_SSTX-
IntA_PA_SSTX- IntA_PB_SSTX+
IntA_PA_SSTX+
GND
GND IntA_PB_D-
IntA_PA_D- IntA_PB_D+
IntA_PA_D+ Dummy
1
USB Type-C Cable
Z690 Phantom Gaming 4/D5
These four SATA3
connectors support SATA
data cables for internal
storage devices with up to 6.0
Gb/s data transfer rate.
There is one header on this
motherboard. This USB
2.0 header can support two
ports.
There are two headers on
this motherboard. Each USB
3.2 Gen1 header can support
two ports.
There is one Front Panel Type
C USB 3.2 Gen2x2 Header
on this motherboard. This
header is used for connecting
a USB 3.2 Gen2x2 module
for additional USB 3.2
Gen2x2 ports.
19