Schellenberg Rollopower Manual Del Usuario página 16

The twilight program operates in conjunction with the pro­
grammed closing times� The roller shutter will only close when
the switching time has been exceeded and the set brightness
value undercut for more than 10 minutes�
Other light sources in the vicinity of the sensor can adversely
affect its function�
The sun protection function is indicated through the symbol �
The twilight function is indicated through the symbol �
The sensor is mounted on the inside of the window pane�
To provide a good sun protection, the insulation position of the
sensor should be selected as low as possible�
Detach the sensor from the window pane by pulling the tab on
the suction cup� Do not pull on the cable!
The sensor can be detached from the window if the window
needs to be cleaned�
ce DeclaratIon anD conformIty
The product meets the applicable requirements of the Euro­
pean and national guidelines� Conformity was evidenced, the
corresponding EC declaration of conformity is included with
the product or can be requested from the after­sales service
section�
E­mail address: service�int@schellenberg�de
16