Measuring Ac Voltage - Voltmaster DCM 1 Manual De Instrucciones

Measuring DC voltage
The maximum input voltage in the DCV range is 600 V DC. To prevent danger from electric
shocks and/or damage to the instrument, do not take measurements of voltages over 600 V.
Set the function switch to the "V" range.
Press the "SEL" button to select DC.
Insert the black and red test leads into the COM and INPUT inputs.
Apply the test leads to the circuit to be measured and read off the value.

Measuring AC voltage

The maximum input voltage in the ACV range is 600 V DC. To prevent danger from electric
shocks and/or damage to the instrument, do not take measurements of voltages over 600 V.
Set the function switch to the "V" range.
Press the "SEL" button to select AC.
Insert the black and red test leads into the COM and INPUT inputs.
Apply the test leads to the circuit to be measured and read off the value.
Resistance / continuity / diode measurement
Before carrying out each resistance measurement, make sure that the circuit to be measured is
voltage free and that all condensers have been discharged.
Set the function switch to the "Ω " range.
Press the "SEL" button to switch between resistance, continuity and diode measurement.
Insert the black and red test leads into the COM and INPUT inputs.
Apply the test leads to the circuit to be measured and read the value.
Note: The continuity test is used to locate short circuits / open circuits.
32