Blender Jar Assembly; Using Your Blender - Black and Decker HELIX Manual Del Usuario

HOW TO USE
This product is for household use only.
GETTING STARTED
• Remove all packing material, any stickers from the product, and the plastic
band around the plug.
• Remove and save literature.
• Please visit www.prodprotect.com/blackanddecker to register your warranty.
• Wash all removable parts as instructed in CARE AND CLEANING
section of this manual.

BLENDER JAR ASSEMBLY

1. Turn blending jar upside down and place flat on
counter top or work surface.
Caution: Blades are sharp. Handle carefully.
2. Place jar base/blade assembly onto jar and rotate
clockwise until it is tight. (A)
3. Turn assembled jar right side up.
4. Place lid on blending jar.
Note: Make sure the ingredient slot is closed.
5. Unwrap power cord from storage area under the base.
6. Place jar assembly on base and turn clockwise to lock
into place. The marks on the jar assembly will align with
the marks on the top edge of the base. (B)
7. Blender is now ready for use.

USING YOUR BLENDER

Important: Appliance should always have lid in place when in use.
Caution: Do not place blender jar onto base when motor is running.
1. Make sure appliance is OFF.
2. Place foods to be blended into jar. For best results place ingredients in jar
in the following order: liquids, powders, soft foods, hard foods, ice.
Note: You must always add a liquid before blending.
3. Place lid on jar; make sure measuring cup lid insert is in place.
4. Plug power cord into outlet.
Note: When in use, do not leave blender unattended. When using hard foods,
such as ice or cheese, keep one hand on the lid to keep blender in place.
5. Select the speed that best suits your desired task.
(See SPEED CHART)
6. When blending thick mixtures, such as smoothies and
milkshakes, press the High Pulse button for several seconds,
then release. Repeat until food has desired consistency. (C)
4
All manuals and user guides at all-guides.com