Before First Use; General Operation; Memoryset Feature - Cuisinart CPT-720 Manual De Instrucciones

BEFORE FIRST USE

Unwind the power cord. Check that the crumb tray is in place and that
there is nothing in the toaster slots. Plug power cord into the wall outlet.

GENERAL OPERATION

1. Insert slice(s) of bread
Be sure that the lever is in the up position.
2. Select desired bread options and/or functions
Choose among WHITE, GRAIN, BAGEL, SWEET, WAFFLE, ENG.
MUFFIN, GLUTEN-FREE for your bread type, and select DEFROST if
desired. Alternatively, use the MEMORY button to retrieve one of your
4 saved settings. Press the MEMORY button until your desired memory
setting is displayed (if this option is chosen, skip to step 4).
3. Set the browning level
Use the "+" and "–" shade buttons to select your desired shade setting.
The shade number will be displayed in the top left corner of the LCD
display. Shade range is as follows:
SETTING
1–2
3–5
6–7
4. To begin toasting
Press the carriage lever until it locks in the down position and toasting
will begin. Remaining time for the toast cycle will begin to count down
on the LCD display.
5. To stop cycle
When the toasting cycle is finished, the toast will be raised. If you wish
to stop the cycle before it is finished, simply touch the CANCEL button.
6. After use, unplug the toaster from the electrical outlet.
NOTE: After 5 minutes of no operation, toaster will go into idle mode,
LCD will turn off. Press any button or push down the start lever, and the
LCD will turn on
COLOR
light
medium
dark

MEMORYSET FEATURE

The MemorySet feature is designed to easily save up to 4 of your
preferred toast settings.
To program a memory setting:
1. Press the red MEMORY button to activate memory functions.
Numbers 1-4 will show on the display.
2. Press the MEMORY button until your desired memory setting number
is selected. Example: Press MEMORY button 3 times for memory
setting 3.
3. Press and hold MEMORY button until flashing.
4. Select desired bread type by pressing the BREAD TYPE button until
the desired setting is indicated by the
5. Select desired toast shade by using the +/- SHADE buttons until the
desired shade setting displays under the
6. Confirm by pressing and holding the MEMORY button until selected
bread type and toast shade stop flashing. Or, if nothing is pressed
for 5 seconds, flashing will stop automatically.
NOTE: Any memory function setting can be revised by repeating the
steps above and overriding the current setting.
NOTE: Memory settings will remain saved even when toaster is
unplugged.
To easily erase all memory settings:
1. Unplug the toaster.
2. Press and hold the SINGLE and DEFROST buttons together.
3. Plug toaster into the power outlet and all memory settings should
have reverted to default (White, shade 4).
5
.
icon.