BEFORE FIRST USE
Unwind the power cord. Check that the crumb trays are in place and that
there is nothing in the toaster slots. Plug power cord into the wall outlet.
GENERAL OPERATION
1. Insert slice(s) of bread
Be sure that the lever is in the up position.
NOTE: Use controls and carriage lever on the left to toast items in
the left slots. Use controls and carriage lever on the right to toast items
in the right slots.
2. Select desired bread options and/or functions
Choose among WHITE, BAGEL, GRAIN, SWEET, WAFFLE, ENG.
MUFFIN OR GLUTEN-FREE for your bread type, and select DEFROST
if desired. Alternatively, use the MEMORY button to retrieve one of your
4 saved settings. Press the MEMORY button until your desired memory
setting is displayed (if this option is chosen, skip to step 4).
3. Set the browning level
Use the "+" and "–" shade buttons to select your desired shade setting.
The shade number will be displayed in the top of the LCD display.
Shade range is as follows:
SETTING
1–2
3–5
6–7
4. To begin toasting
Press the carriage lever until it locks in the down position and toasting
will begin. Remaining time for the toast cycle will begin to count down
on the LCD display.
5. To stop cycle
When the toasting cycle is finished, the toast will be raised. If you wish
to stop the cycle before it is finished, simply touch the CANCEL button.
6. After use, unplug the toaster from the electrical outlet.
COLOR
light
medium
dark
NOTE: After 5 minutes of no operation, toaster will go into idle mode,
LCD will turn off. Press any button or push down the carriage lever,
and the LCD will turn on
MEMORYSET FEATURE
The MemorySet feature is designed to easily save up to 4 of your
preferred toast settings per toast side, for a total of 8 memory settings.
To program a memory setting:
1. Press the red MEMORY button to activate memory functions.
Numbers 1-4 will show on the display.
2. Press the MEMORY button until your desired memory setting
number is selected. Example: Press MEMORY button 3 times
for memory setting 3.
3. Press and hold MEMORY button until flashing.
4. Select desired bread type by pressing the BREAD TYPE button
until the desired setting is indicated by the
5. Select desired toast shade by using the +/- SHADE buttons until
the desired shade setting displays under the
6. Confirm by pressing and holding the MEMORY button until selected
bread type and toast shade stop flashing. Or, if nothing is pressed
for 5 seconds, flashing will stop automatically.
NOTE: Any memory function setting can be revised by repeating
the steps above and overriding the current setting.
NOTE: Memory settings will remain saved even when toaster
is unplugged.
To easily erase all memory settings:
1. Unplug the toaster.
2. Press and hold the SINGLE and DEFROST buttons together.
3. Plug toaster into the power outlet and all memory settings should
have reverted to default (White, shade 4).
5
.
icon.