Tabla de contenido
Publicidad
ASSEMBLY INSTRUCTIONS
1. Shut off the water supply and remove the
old faucet.
2. Install the faucet:
a. Remove the preassembled mounting
nuts (C) from the faucet (A) and place
the base plate (B) and the faucet (A) in
position on the sink.
Note: If the sink surface is uneven, use
silicone sealant (not included) to create
a watertight seal.
b. From under the sink, thread the
mounting nuts (C) onto the faucet (A).
c. Tighten the mounting nuts (C).
Note: Tighten mounting nuts until snug.
Do not overtighten.
3. Connect a 1/2 in. IPS faucet connector or
coupling nuts (not included) with 3/8 in.
O.D. ball-nose risers (not included) to the
water supplies underneath the sink using
wrenches (not included).
Note: Refer to the local plumbing codes for
permissible types of water supply
connectors.
1
2
C
3 3 3
4
A
B
Lowes.com
Publicidad
Tabla de contenido
