Gude GPS-E 40 A.2 Traducción Del Manual Original página 26

ENGLISH
22
directly against a wall during functional operation.
Only in this way can it be ensured that sufficient air
gets into the opening slit.
CAUTION! Improper handling may lead to
the plasma cutter overheating or to material
damage.
Stay alert, watch what you are doing and use
common sense when operating a power tool. Do
not use a power tool while you are tired or under the
influence of drugs, alcohol or medication.
Check the machine for any damage
WARNING The power cut-off should always be in the
"off" position when the machine is left unattended.
The appliance must not be used if damaged or safety
equipment is defective. Replace any worn-out and
damaged parts.
The device must not be operated if it is damaged in
any way.
Repairs and works specified in these Instructions may
only be performed by qualified authorised staff.
Maintain power tools. Check for misalignment or bin-
ding of moving parts, breakage of parts and any other
condition that may affect the power tool's operation.
If damaged, have the power tool repaired before use.
Electrical safety
Operation is only allowed with a safety
switch against stray current (RCD max. stray
current of 30mA).
Insert the plug of the electrical cable in a socket of
suitable shape, voltage and frequency complying
with current regulations.
Incorrect electrical installation, a supply voltage
which is too high or incorrect handling may lead to
an electric shock. Any electric shock may be fatal.
Use extension cables with a maximum length of 5
meters and with a cable cross-section of not less than
1.5 mm2. Use of extension cables of different length
and cross-section and also of adapters and multiple
sockets should be avoided.
Warning: This power tool generates an
electromagnetic field during operation. Under
certain circumstances, this field may affect
active or passive medical implants. To reduce
the risk of serious or fatal injury, we recom-
mend that individuals with medical implants
consult your physician and the manufacturer
of the medical implant before operating the
machine. Persons with life support devices such
as pacemakers should consult their doctor before
approaching this apparatus, to ensure that
magnetic fields and high electrical currents will
not interfere with such devices.