Gude GPS-E 40 A.2 Traducción Del Manual Original página 30

ENGLISH
26
Special welding gloves to be worn at all
times.
Wear safety cut through resistant shoes
with safety sole and steel toe !
Protective apron to be used
Unplug the machine before any work
on it.
Wear dust mask
Warning against hot surfaces!
Warning against dangerous voltage
The appliance must be stored in a dry place and
protected from frost.
Keep the machine out of reach of children.
Never expose tool to rain.
GPS 40A
Plasma arc cutting
Suitable for welding with an increased
electric risk.
10A/84V
Single-phase alternating current with
rated frequency of 50-60 Hz
40A
370V
96V
Direct Current
30A
370V
GÜDE GmbH & Co. KG·Birkichstr.6 ·74549 Wolpertshausen·www.guede.com
Fan
Class H
GÜDE GmbH & Co. KG·Birkichstr.6 ·74549 Wolpertshausen·www.guede.com
Artikelnummer: 20063
Baujahr: 2017
Class H
Seriennummer:
Artikelnummer: 20063
Baujahr: 2017
Seriennummer:
Co. KG·Birkichstr.6 ·74549 Wolpertshausen·www.guede.com
GÜDE GmbH & Co. KG·Birkichstr.6 ·74549 Wolpertshausen·www.guede.com
Warning against toxic fumes!
GPS 40A
GPS 40A
Single Phase Output
Static Frequency Converter
Rectifier
10A/84V 40A/26V
10A/84V 40A/26V
40A 25.8A
370V
40A
96V 90.3V
370V
GPS 40A
96V
30A
40A/26V
30A
Class H
Class H
25.8A 20A
Artikelnummer: 20063
Baujahr: 2017
Artikelnummer: 20063
Seriennummer:
90.3V 88V
10A/84V 40A/26V
Baujahr: 2017
Seriennummer:
15A
40A 25.8A 20A
96V 90.3V 88V
30A 15A
MAINTENANCE
Prior to every use, visually check the machine to rule
out any defects, in particular on the power cable and
the plug.
WARNING The appliance must not be used if da-
maged or safety equipment is defective. Replace any
worn-out and damaged parts.
If necessary, a list of spare parts can be found at www.
guede.com.
Repairs and works specified in these Instructions
may only be performed by qualified authorised staff.
If the device is defective, the repair has to be made
exclusively by the customer service.
Use only original accessories and original spare parts.
Never clean the machine and its components with
solvents, flammable or toxic liquids. Us only a damp
cloth making.
Use a soft brush to remove the deposited dust from
the ventilation hole and moving parts after each use.
Only a regularly maintained and treated appliance
can serve as a satisfactory aid. Insufficient mainte-
nance and care can lead to unforeseen accidents and
20A
injuries.
25.8A 20A
If necessary, a list of spare parts can be found at
88V
www.guede.com.
90.3V 88V
15A Only a regularly maintained and treated appliance
can serve as a satisfactory aid. Insufficient mainte-
15A
nance and care can lead to unforeseen accidents and
injuries.
If the replacement of the supply cord is necessary, this
has to be done by the manufacturer or his agent in
order to avoid a safety hazard.
Keep dry at all times.
Any damaged or disposed electric or
electronic devices must be delivered to
appropriate collection centres.
CE marking
Machine to be always unplugged before
any adjustment and servicing work on it.