Descargar Imprimir esta página

Danfoss AKC 115 Guia De Inicio Rapido página 6

Publicidad

Display
Afficheur
Der kan tilsluttes et display type AKA 14 (AKA 15) til hver regulering (I
To each control a display type AKA 14 (AKA 15) can be connected (i.e. for A, B and C)
(I
= 30 mA)
max.
An jede Regelung kann ein Display Typ AKA 14 (AKA 15) angeschlossen werden
(I
= 30 mA)
max.
Chaque section de régulation accepte un afficheur type AKA 14 (AKA 15) (I
Se puede conectar un displsy tipo AKA 14 (AKA 15) a cada regulador (I
Datasignal
Data signal
Datenübertragung
Signal de données
Señal de datos
Datasignalet videreføres fra regulator til regulator (L-L og H-H)
Det er vigtigt at installationen af datakommunikationskablet udføres korrekt. Se separat litteratur nr. RC.0X.A
The data signal continues from controller to controller (L-L and H-H)
The correct installation of the data communication cable is highly important. Please refer to separate literature no. RC.0X.A
Die Datenübertragungs-Ringleitung wird von Regler zu Regler weitergeführt (L-L und H-H)
Der korrekten Installation des Datenkommunikationskabels muß besondere Aufmerksamkeit geschenkt werden.
Siehe Ergänzungsliteratur RC.0X.A
Le signal de données est transféré de régulateur en régulateur (L-L et H-H)
L'installation correcte du câble de transmission est essentielle. Voir la documentation spéciale RC.0X.A
La señal de datos se transfiere de regulador en regulador (L-L y H-H)
Es muy importante la correcta instalación del cable de comunicación de datos. Ver documentación separada RC.0X.A
6
Instructions RI.1M.D6.53 © Danfoss 02/2002
DI:
= 30 mA)
Reserveret funktion
max.
Dedicated function
Reservierte Funktion
Fonction réservée
Fonción reservada
U = 10 V d.c.
= 30 mA)
I
max.
R
= 30 mA)
máx.
5 mA
max.
= 2 kW
I
AKC 115

Publicidad

loading