Beta 1928/K4 Manual De Instrucciones página 8

spare parts.
Keep the tool away from dust, humidity and intense cold.
WARRANTY
This tool is manufactured and tested with the greatest care, in
accordance with current safety regulations, and is covered by a
24-month warranty.
We will repair any breakdowns caused by material or
manufacturing defects by fixing the defective pieces or
replacing them at our discretion. Should assistance be asked
for during the warranty period, the expiry date of this warranty
will remain unchanged.
This warranty will not cover any defects due to wear, misuse, or
breakdowns caused by blows and/or falls. In addition, this
warranty will no longer be valid if any changes are made, or if
the tool is tampered with or sent to the customer service in
pieces.
This warranty explicitly excludes any damage to people and/or
things, whether direct or consequential.
.
DECLARATION OF CONFORMITY TO THE "MACHINE"
DIRECTIVE
BETA UTENSILI SPA
VIA A. VOLTA, 18
20050 SOVICO (MB)
hereby certify, assuming full responsability, that the product:
3/4" REVERSIBLE IMPACT WRENCH
item 1928/K4
complies with the following standards, according to the
requirements set by the "Machine Directive":
2006/42/CE
Place and date of issue
SOVICO (MB) ITALY
January 2010
Name and title of the person in charge
MASSIMO CICERI
(Managing Director)
SPECIFICATIONS
SQUARE DRIVE
BOLT CAPACITY (8.8)
BOLT CAPACITY (12.9)
FREE SPEED
MAXIMUM TORQUE
AIR INLET
WORKING PRESSURE
MAXIMUM WORKING PRESSURE 6,2 Bars
MINIMUM INTERNAL HOSE SIZE
MAXIMUM AIR CONSUMPTION
WEIGHT
OVERALL LENGTH
DEVICE
SOUND PRESSURE
SOUND POWER
VIBRATION LEVEL
we
ITALY
3/4"
M27 41 mm
M24 36 mm
4000 RPM
1493 Nm
3/8" taper GAS
6,0 Bars
10 mm
330 l/min
5,2 Kg
258 mm
Pin clutch
90,0 dB (A)
93,5 dB (A)
3,50 m/sec 2 (ISO 8662-7)