ASROCK Fatal1ty Z97 Killer/3.1 Manual De Instrucciones página 25

Power LED Header
(3-pin PLED1)
(see p.1, No. 17)
Serial ATA3 Connectors
(SATA3_0:
see p.1, No. 14)
SATA3_0
(SATA3_1:
see p.1, No. 9)
(SATA3_2:
SATA3_3
see p.1, No. 10)
(SATA3_3:
see p.1, No. 13)
(SATAE_4:
see p.1, No. 11)
(SATAE_5:
see p.1, No. 11)
Serial ATA Express
Connector
(SATAE:
see p.1, No. 11)
USB 2.0 Headers
(9-pin USB4_5)
(see p.1, No. 15)
(9-pin USB6_7)
(see p.1, No. 16)
Please connect the chassis
1
power LED to this header
PLED-
PLED+
PLED+
to indicate the system's
power status.
hese six SATA3
connectors support SATA
data cables for internal
SATA3_1 SATA3_2
storage devices with up to
6.0 Gb/s data transfer rate.
he SATAE_4, SATAE_5
SATAE_5 SATAE_4
are shared with the SATA
Express connector.
Please connect either
SATA or PCIe storage
devices to this connector.
he SATA Express
connector is shared with
the SATAE_4, SATAE_5
and the M.2_SSD (NGFF)
Socket 3.
*he SATA Express
interface is a combination
of SATAE, SATAE_4, and
SATAE_5.
Besides four USB 2.0 ports
USB_PWR
P-
on the I/O panel, there
P+
GND
DUMMY
are two headers on this
motherboard. Each USB
1
GND
2.0 header can support
P+
P-
USB_PWR two ports.
Fatal1ty Z97 Killer/3.1 Series
21