Troubleshooting Tips; Before You Call For Service - GE WPSQ4160 Manual Del Propietário

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Before you call for service...

Troubleshooting Tips

Save time and money! Review the charts on the following pages
first and you may not need to call for service.
Problem
Washer won't operate
Water temperature
is incorrect
Possible Causes
Washer is unplugged
Water supply is turned off
Controls are not set
properly
Lid is open
Circuit breaker/fuse is
tripped/blown
Control is not set properly
Water supply is turned off
or improperly connected
Water valve screens are
stopped up
House water heater is
not set properly
What To Do
Make sure cord is plugged
securely into a working
outlet.
Turn both hot and cold
faucets fully on.
Check controls and
make sure Cycle knob is
pulled out to ON position.
Close lid and pull Cycle
knob out to ON position.
Check house circuit
breakers /fuses. Replace
fuses or reset breaker.
Washer should have
separate outlet.
Check water temperature
control and adjust.
Turn both hot and cold
faucets fully on and make
sure hoses are connected
to correct faucets.
Turn off the water source
and remove the water
connection hoses from
the upper back of the
washer. Use a brush or
toothpick to clean the
screens in the machine.
Reconnect the hoses and
turn the water back on.
Make sure house water
heater is delivering water
at 120°F.–140°F.
(48°C.–60°C.).
15

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Zpsq4160

Tabla de contenido