Troubleshooting - MBM EFT908LRC Instrucciones Para El Funcionamiento

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 52
4.
ROUTINE MAINTENANCE

Troubleshooting

Whenever the appliance does not work properly, try to solve the less serious problems using
this table.
FAULT
The appliance does not turn on.
The cooking compartment is
stained.
The light indicators do not turn
on.
If the problem cannot be resolved, turn the appliance off, disconnect it from the electrical mains
and shut all the supply valves. Then contact authorized customer service
THE PRESENT MANUAL IS PROPERT Y OF THE MANUFACTURER. ANY REPRODUCTION, EVEN PARTIAL, IS PROHIBITED.
POSSIBLE CAUSE
The master switch is not
connected.
The residual current device
or circuit breaker has tripped.
Quality of the water.
Ineffective detergent.
Insufficient rinsing.
The master switch is not
connected.
The residual current device
or circuit breaker has tripped.
- 15 -
15
INTERVENTION
Connect the master switch.
Restore the residual current
device or circuit breaker.
Filter the water (see water
softener).
Use the recommended
detergent.
Rinse once again.
Connect the master switch.
Restore the residual current
device or circuit breaker.

Publicidad

Tabla de contenido
loading

Tabla de contenido