LG 55LV640S Guía Rápida De Configuración página 21

Supported Video Formats
Extension
VC-1 Advanced Profile (Except
Video for WMVA), VC-1 Simple and
Main Profiles
.asf, .wmv
WMA Standard (Except for
Audio
WMA v1/ WMA Speech)
Xvid (Except for 3 warp-point
Video GMC), H.264/AVC, Motion
Jpeg, MPEG-4
.avi
MPEG-1 Layer I, MPEG-1 Layer
II, MPEG-1 Layer III (MP3),
Audio
Dolby Digital, LPCM, ADPCM,
DTS
Video H.264/AVC, MPEG-4, HEVC
.mp4,
Dolby Digital, Dolby Digital
.m4v,
Audio Plus, AAC, MPEG-1 Layer III
.mov
(MP3)
Video H.264/AVC, MPEG-4
.3gp, .3g2
Audio AAC, AMR-NB, AMR-WB
MPEG-2, MPEG-4, H.264/AVC,
Video
VP8, VP9, HEVC
Dolby Digital, Dolby Digital
.mkv
Plus, AAC, PCM, DTS, MPEG-1
Audio
Layer I, MPEG-1 Layer II, MPEG-
1 Layer III (MP3)
Video H.264/AVC, MPEG-2, HEVC
MPEG-1 Layer I, MPEG-1 Layer
.ts, .trp,
II, MPEG-1 Layer III (MP3),
.tp, .mts
Audio
Dolby Digital, Dolby Digital
Plus, AAC, PCM
.mpg, Video MPEG-1, MPEG-2
.mpeg,
MPEG-1 Layer I, MPEG-1 Layer
Audio
.dat II, MPEG-1 Layer III (MP3)
Video MPEG-1, MPEG-2
.vob
Dolby Digital, MPEG-1 Layer I,
Audio
MPEG-1 Layer II, DVD-LPCM
Codec
Regulatory
WARNING!
Never place a television set in an unstable
location. A television set may fall, causing serious
personal injury or death. Many injuries, particularly
to children, can be avoided by taking simple
precautions such as:
• Using cabinets or stands recommended by the
manufacturer of the television set.
• Only using furniture that can safely support the
television set.
• Ensuring the television set is not overhanging
the edge of the supporting furniture.
• Not placing the television set on tall furniture
(for example, cupboards or bookcases) without
anchoring both the furniture and the television
set to a suitable support.
• Not placing the television set on cloth or other
materials that may be located between the
television set and supporting furniture.
• Educating children about the dangers of
climbing on furniture to reach the television set
or its controls.
If your existing television set is being retained
and relocated, the same considerations as above
should be applied.
Symbols
Refers to alternating current(AC).
Refers to direct current(DC).
Refers to class II equipment.
Refers to stand-by.
Refers to "ON" (power).
Refers to dangerous voltage.
13