Problems And Solutions - Pulmic PEGASUS 15 Manual De Instrucciones

PULMIC PEGASUS 15

6. PROBLEMS AND SOLUTIONS

PROBLEM
Sprayer does not turn
on.
Leaks from tank area.
Leaks from gun/nozzle
area.
Clogged pump / hose /
gun / wand / nozzle.
Random part breaks.
Pump runs constantly or
intermittently.
Watch the videos of the main repairs through the
following link or QR:
www.tiny.cc/troubleshooting-peg15
POSSIBLE CAUSE
Battery is not charged.
Loose wire.
Input and/or output
hose(s) have a loose
connection with the
pump.
Loose / damaged /
broken seal(s)
Ball valve inside gun
assembly is defective
Not rinsing tank / pump
/ hose / gun / nozzle(s)
with cleaning solution or
water after use.
Wear and tear.
Pressure switch
adjustment is needed on
the pump.
— 15 —
www.gruposanz.es
SOLUTION
Charge battery.
Contact us for technical
support.
Remove screws and
remove the plastic
covering to expose pump.
Loosen clamps on both
hoses, position hose closer
to pump and re-tighten
hose clamp.
Inspect all seals and
replace if necessary.
Contact us for technical
support / warranty info.
Rinse sprayer throughly
with warm, soapy water
after each use. Wipe down
filter inside tank.
Contact us for warranty
coverage.
Contact us for technical
support.