Dymo LabelWriter 450 Duo Guía Rápida De Inicio página 5

Insert the label spool into the slot in the cover with the labels extending from underneath the roll
3
Align the left edge of the label with the left edge of the label feed slot and insert the label into the
4
slot.
The printer automatically feeds the label, stopping at
5
the beginning of the first label.
Slide label guide against labels.
6
IMPORTANT! In order for the labels to feed properly
during printing:
Press the label spool guide flush against the label roll,

leaving no gap.
Insert the label with the left edge against the left edge

of the label feed slot.
To load a label cassette
Press the button on the front of the printer to open the
1
label cassette compartment.
Remove the protective cardboard insert from the
NOTE
label exit slot.
Insert the cassette and press firmly until the cassette
2
clicks into place. Make sure label and ribbon are
positioned correctly.
Press the button on the front of the printer to close the
3
label cassette compartment.
Align labels
against left
edge
Push down gently
.
Slide label
guide against
labels
Remove
cardboard
insert
Press to open/close
3