Sharp HT-SB200 Manual De Manejo página 24

General control (continued)
HT-SB200
ENGLISH
Remote control operation:
Press the VOL + button to increase the volume and the VOL –
button to decrease the volume.
Muting
The volume is muted temporarily when pressing
the MUTE button on the remote control. Press
again to restore the volume.
Preset sound mode
Main unit operation:
When the SURROUND button is pressed, the current mode setting
will light up. To change to a different mode, press the SURROUND
button repeatedly until the desired sound mode lights up.
Remote control operation:
Press a desired sound mode on the remote control.
STANDARD
SPORT
STANDARD
CINEMA/GAME
SPORT
NEWS
Subwoofer level control
The speaker level can be adjusted.
To increase the level, press the
SUBWOOFER LEVEL
To decrease the level, press the
SUBWOOFER LEVEL
Note:
When sound from the speaker is distorted, decrease the
E-13
subwoofer level.
CINEMA/GAME
NEWS
WOW HD off
WOW HD on for cinema/game sound effect
WOW HD on for sport broadcasting
WOW HD on for news
button.
button.
Bass control
1. Press the BASS/TREBLE button
to select "BASS".
2. Within 5 seconds, press the
VOLUME (+ or –) button to adjust
the bass.
Treble control
1. Press the BASS/TREBLE button
to select "TREBLE".
2. Within 5 seconds, press the
VOLUME (+ or –) button to adjust
the treble.
Function
When the FUNCTION button on
speaker or LINE button on the remote
control is pressed, the input source
will change. Press the FUNCTION
button on speaker or LINE button on
the remote control repeatedly to
select desired input source.
Note:
The backup function will protect the memorised function mode
for a few hours should there be a power failure or the AC power
lead becomes disconnected.
Auto power on function:
When you press the LINE button on the remote control, the
speaker will turns on at last function.
Auto power off and auto detect signal:
The speaker will automatically power off after 1 minute of
inactivity. The STAND-BY indicator turns orange. At this point it
will automatically power ON if it detects audio signal from the
connected equipment.
-5 -4 ... 4 5
-5 +5
-5 +5
LINE 1
LINE 2