G30029; Operating; Cleaning; Technical Features - TREVIDEA g3ferrari SPASSO Manual Del Usuario

bath, a device to differential current, not greater than
30mA. Contact technician for more information.
- Do not keep appliance switched on continously for more
than 2 minutes. Bring knob on "0" (OFF) position before
inserting the plug in the socket.
- Do not grab the product near to the air outlet, use the
handle. Keep at least at 5cm from the head
DESCRIPTION G30029
1. Airflow concentrator
3. Inlet air opening / Removable filter
5. Temperature control switch

OPERATING

- Set the power switch (6) to "0" and plug the dryer into the power outlet.
- This dryer operates with 2 speeds, set the button (6) to "I" for lower speed and "II" for higher speed.
- Set the air temperature using the temperature switch (5).
- Caution: air concentrator (1) heats up quickly. When the dryer is running, do not touch it.
- At the end of drying process, set the power switch (6) to "0" position.
- Let the hairdryer cool down completely. (Approximately 10 minutes)
-
Once the unit is completely cold, store it out of the reach of children.
Temperature control switch
This device offers the possibility to select temperature of airflow. Set the temperature control switch (5) to
"O" for setting the airflow at room temperature, "I" for moderately hot air and "II" for hot air.
Cool-shot
The hair dryer constantly delivers a flow of hot air. Pushing "Cool-shot" button (4), internal resistance will be
temporarily disabled and in a few seconds the device will blow air at room temperature.
Professional AC motor
Thanks to the professional AC motor, the appliance has great efficiency and the airflow is always constant
and powerful.
Diffuser
The product is provided with a diffuser, that gives softness and volume to the hair. Assemble the diffuser by
removing the airflow concentrator (1), fitting it to the air outlet until it clicks.
Ion emission
This product has a device able to release ions during use. The ion function reduces drying time, facilitating
the styling of the hair and removing the annoying electrostatic effect.
CLEANING –
of the unit before starting cleaning operations.
Do not immerse the dryer in water, but clean with a slightly damp soft cloth. Periodically clean the air intake
inlet (3) with a dry brush in order to avoid the formation of dust, to ensure a good ventilation of the AC motor
and internal resistance. Remove the filter (3) for a better cleaning.

TECHNICAL FEATURES

•
Power supply: AC 220-240V~50-60Hz. Power: 1800-2200W
•
Concentrator, diffusor
•
3 temperatures, 2 speeds, cool-shot of air
Unplug the device from the electrical outlet and wait for the complete cooling down
2. Main body
4. Cool-shot button
6. 2 speeds power switch 7. Hook for hanging
11