To Connect The Battery To The Product; To Change The Rotation Direction Of The Trimmer Head; To Start The Product; Automatic Shutdown Function - RedMax BTR250PL Manual Del Usuario

4. When all LEDs on the battery come on, the battery is
fully charged.
5. To disconnect the battery charger from the mains
socket, pull the plug. Do not pull the cable.
6. Remove the battery from the battery charger.
Note: Refer to the battery and battery charger manuals
for more information.

To connect the battery to the product

WARNING: Only use original BLi200ZR
battery in the product.
1. Make sure that the battery is fully charged.
2. Slide the battery into the battery holder of the
product. The battery must slide easily, if not, it is not
installed correct. The battery will lock into position
when you hear a click.
3. Make sure the battery is installed correctly.

To start the product

1. Press and hold the start/stop button until the green
LED is lit.
2. Use the power trigger to control the speed.

To start the SavE function

The product has a SavE function. With the SavE
function the operator can set a constant speed.
463 - 002 - 09.01.2018
1. Press and hold the power trigger at the selected
speed for the operation.
2. Press the SavE button to set the selected speed.
The green LED comes on to show that the function
is on.
3. Press the SavE button again to stop the SavE
function.
To change the rotation direction of the
trimmer head
It is possible to change the rotation direction of the
trimmer head. This can be done both in full speed or at
stop position. By default the trimmer head rotates
clockwise. The green LED is off when it is in default
position.
1. Press the rotation direction button to active the
function. A green LED will light to indicate that the
trimmer head rotates counterclockwise.
Note: It is easier to tap out the trimmer line to make it
longer when the trimmer head rotates clockwise.

Automatic shutdown function

The product is equipped with a shutdown function that
deactivates the product if it is not used. The green LED
light for start/stop indication will go out and the product
shuts down after 45 seconds.
11