Symbols On The Product; Product Liability; Safety; Safety Definitions - RedMax BTR250PL Manual Del Usuario

21. 4 mm hex key
22. Loop eyelet

Symbols on the product

WARNING! This product can be dangerous!
Careless or incorrect use can result in
serious or fatal injury to the operator or
others. It is extremely important that you
read and understand the contents of the
operator's manual. Please read the
operator's manual carefully and make sure
you understand the instructions before the
product is used.
Use approved hearing protection. Use
approved eye protection.
Maximum speed of the output shaft.
Use approved protective gloves.
Use heavy-duty slip-resistant boots.
The product can cause objects to eject,
which can cause injury.
Keep a minimum distance of 15 m to
persons and animals during operation of the
product.
Only use a flexible cutting wire. Do not use
metal cutting elements.
Risk of blade thrust if the cutting equipment
touches an object that it does not

Safety definitions

Warnings, cautions and notes are used to point out
specially important parts of the manual.
WARNING: Used if there is a risk of injury or
death for the operator or bystanders if the
instructions in the manual are not obeyed.
463 - 002 - 09.01.2018
immediately cut. The product can cut off
body parts. Keep a minimum of 15 m
distance to persons and animals during
operation of the product.
The arrows show the limit for the handle
position.
Keep the unit away from water and rain.
Direct current.
Proposition 65
Manufacturer
Husqvarna AB
Drottninggatan 2, SE-561 82 Huskvarna, Sweden, tel:
+46-36-146500

Product liability

As referred to in the product liability laws, we are not
liable for damages that our product causes if:
• the product is incorrectly repaired.
• the product is repaired with parts that are not from
the manufacturer or not approved by the
manufacturer.
• the product has an accessory that is not from the
manufacturer or not approved by the manufacturer.
• the product is not repaired at an approved service
center or by an approved authority.

Safety

CAUTION: Used if there is a risk of damage
to the product, other materials or the
adjacent area if the instructions in the
manual are not obeyed.
Note: Used to give more information that is necessary in
a given situation.
3