Technical Specifications - SDMO PHOENIX 6300 Manual De Utilización Y Mantenimiento

7. Technical specifications

7.1. Operating conditions
The stated outputs of the generating sets are obtained under the reference conditions outlined in ISO 8528-1(2005):

Total barometric pressure: 100 kPa - Ambient air temperature: 25°C (298 K) - Relative humidity: 30%.
Generating set performance is reduced by approximately 4% for every additional 10° C and/or approximately 1% for every additional
100m in altitude. Generating sets can only operate while stationary.
7.2. Capacity of the generating set (overload)
Before connecting and operating the generating set, calculate the electrical power required by the devices to be used (in watts)*. When
running several devices simultaneously, never exceed the rated load of the generating set (in amps and/or watts) when it is operating
continuously.
*This load is usually indicated in the technical specifications or on the device manufacturer's plate. Some devices require a higher load
when starting. This minimum required power must not exceed the generating set's maximum power.
7.3. Specifications
Model
Maximum output / Rated output
Acoustic pressure at 1 m and measurement uncertainty
Engine type
Recommended fuel
Fuel tank capacity
Recommended oil
Oil sump capacity
Oil failure cut-out
Circuit breaker
Direct current
Alternating current
Socket type
Spark plug type
Battery
Dimensions l x w x h
Weight (without fuel)
● : standard ○ : option
7.4. EC Declaration of conformity
Name and address of manufacturer :
SDMO Industries - 12 bis rue de la Villeneuve - CS 92848 -
29228 BREST Cedex 2 – France.
Product description :
Generating set
L. Courtès, the manufacturer's authorised representative, hereby declares that the product conforms to the following EU Directives:
2006/42/EC Machinery Directive ; 2006/95/EC Low Voltage Directive ; 2004/108/EC Directive on Electromagnetic Compatibility ;
2000/14/EC Directive relating to the Noise Emission of Outdoor Equipment.
Notified body :
CETIM - BP 67-
F60304 - SENLIS
X: not possible
Make :
SDMO
For the directive 2000/14/EC :
Compliance procedure :
Appendix VI.
86 dB(A)
Name and address of the person authorised to create and keep
the technical file
L. Courtès - SDMO Industries - 12 bis rue de la Villeneuve -
CS 92848 - 29228 BREST Cedex 2 – France.
Type :
PHOENIX 6300
Measured
sound power level: sound power level (LwA) :
96.89 dB(A)
L. Courtès, Assistant Director, Design and Projects.
PHOENIX 6300
6500 W / 5200 W
0.70
Kohler CH 440
Unleaded petrol
7.3 L
SAE 10W30
1.1 L
●
●
X
230V - 22,6A
2 x 2P+T 230V 10/16A
CHAMPION : RC12YC
X
76 x 53 x 51 cm
96 kg
Serial numbers:
01-2014-00000000-000
> 52-2019-99999999-999
Guaranteed
Rated output :
97 dB(A)
Brest, 01/01/2014
5200 W