Operation; Preparation; Blending - Beko HBS6702W Manual De Usuario

3

Operation

3.1 Preparation

1. Remove all packaging and sticker materials
and dispose of them according to the
applicable legal regulations.
2. Before using the appliance for the first time,
clean parts which come into contact with food
(see the "Cleaning and care" section).
3. Cut the food into small pieces before
processing with the appliance.

3.2 Blending

1. Put the food that you would like to puree or
mix in the measuring beaker (8) or a similar
bowl.
2. Attach the blending attachment (7) to the
motor unit (5) by pushing the attachment to
the motor until it locks. Make sure the blending
attachment is properly attached to the motor
unit.
3. Insert the plug into the wall socket.
4. Immerse the blending attachment (7) in
the measuring beaker (8), that contains the
ingredients to be blended.
To prevent the ingredients from
C
splashing, do not press the On/Off
button (3) or turbo button (4) until
the blending attachment (7) has
been immersed in the ingredients.
5. Press and hold down the On/Off button (3).
– The appliance starts operating.
6. Use the speed control (2) to select a speed or
press and hold the turbo button (4).
– The speed indicator LED (1) illuminates
according to the desired speed 1-6.
When you use the turbo button (4)
C
the appliance operates at maximum
speed. In this case you cannot adjust
the speed with the speed control (2).
Hand Blender / User Manual
All manuals and user guides at all-guides.com
C
7. Move the appliance slowly up and down and in
C
8. Release the On/Off button (3) or turbo button
9. Disassemble the blending attachment (7) only
C
C
C
C
C
While using the turbo button (4), all
speed indicator LEDs (1) illuminate.
circles to blend the ingredients.
Always switch off the appliance
before taking out the processed
food.
(4) when you are finished and disconnect the
power plug from the wall socket. Remove the
mixture from the measuring beaker (8).
by pushing the attachment release buttons (6)
at the sides of the appliance and pulling it off
from the motor unit (5).
To prevent overheating do not
operate the appliance continuously
for more than 10 seconds.
Never switch on the appliance
for longer than necessary for
processing the food.
To prevent overflowing of the
mixture do not overfill the measuring
beaker (8) or bowl. Smaller amounts
are easier to process.
To prevent any accidents use the
beaker lid as anti-slip rubber pad by
putting the beaker base (9) on the
lid.
If you would like to use the blending
attachment (7) directly in the pot,
first take the pot off the stove to
prevent the blending attachment
from overheating.
7 / 56 EN