Accessories And Spare Parts; Environmental Instructions; Ec Declaration Of Conformity - Würth COMPACT 20 l OILFREE Traducción Del Manual De Instrucciones De Servicio Original

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 46
Warranty
We provide a warranty for this Würth device
from the date of purchase and in accordance
with the legal/country-specific regulations (proof
of purchase through invoice or delivery note).
Damage that has occurred will be corrected either
by replacement or by repair. Damage caused by
improper handling is not covered by the warranty.
Claims under warranty can only be accepted if
the device is returned fully assembled to a Würth
agency, your Würth sales representative or an
authorised Würth customer service workshop. Sub-
ject to technical changes without prior notice.
We accept no liability for printing errors.

Environmental instructions

The condensation from the pressure tank and the
filter pressure reducer contains impurities that are
harmful for the environment. Dispose of the conden-
sation water at appropriate collection points.
Dispose of the used oil from the compressor in an
environmentally responsible manner at appropriate
collection points.
Do not throw the device away with
normal domestic waste. Dispose of
the device via an approved waste
disposal company or via your local
authority waste disposal facility.
Observe the currently valid regula-
tions. In case of doubt, contact your
waste disposal facility. Dispose of all packaging in
an environmentally compatible manner.

Accessories and spare parts

If in spite of careful manufacturing and test proce-
dures, the device becomes faulty, a repair by Würth
masterService should be arranged. With any
enquiries or spare parts orders, always quote the
article number as given on the device type plate.
The latest spare parts list for the device is available
online at http://www.wuerth.com/partsmanager.
Alternatively, contact your local Würth agency for a
hardcopy.

EC Declaration of Conformity

We declare under our sole responsibility that this
product conforms to the following standards and
directives:
Standards
• EN 1012-1:2010
• EN 60204-1:2006+A1:2009
• EN ISO 12100:2010
• EN 50581:2012
in accordance with the regulations stipulated in the
directives:
EC Directive
• 2011/65/EU
• 2006/42/EC
• 2014/30/EU
• 2000/14/EC
• 2004/108/EC
Technical documentation at:
Adolf Würth GmbH & Co. KG
Reinhold-Würth-Straße 12 – 17,
74653 Künzelsau, Germany
F. Wolpert
Head of Product Manage-
ment,
Authorised Signatory
Künzelsau: 16.10.2017
Dr.-Ing. S. Beichter
Head of Quality, Author-
ised Signatory
25

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

0701 224 0

Tabla de contenido