Setting Stimulation Intensity - Num'axes CANIFUGUE Manual De Instrucciones

- checking the stimulation zone:
Same as above: when you enter the stimulation zone, the test lamp lights. If you think
this distance is too large, go back to the transmitter. Push the slider to a lower level:
this will reduce the stimulation zone. Check this new setting on your property.
important: zone width varies depending on the length of antenna wire laid out on the
property. The longer the antenna wire, the narrower the zone.

setting stimulation intensity


The caniFuGue collar is equipped with 8 modes so you can adapt the level of stimulations
to the size and sensitivity of your dog.
to change the mode, the collar must be switched on (battery in its housing).
Opening the battery cover gives you access to the push button indicated by a pointer (cf.
Diagram No. 2).
Gb - 25